Bedienungsanleitung DeWalt D51850 (Seite 33 von 144) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546481

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

ENGLISH

Using the bump action trigger, two methods are

available: place actuation and bump actuation.

To operate the tool using the place actuation

method:

1. Depress the contact trip against the work

surface.

2. Depress the trigger.

To operate the tool using the bump actuation

method:

1. Depress the trigger.

2. Push the contact trip against the work surface.

As long as the trigger is depressed, the tool

will fire a nail every time the contact trip is

depressed. This allows the user to drive multiple

nails in sequence.

CAUTION: Do not keep trigger

depressed when tool is not in use. Keep

the lock-off switch rotated to the right

(OFF) when the tool is not in use.

Loading the Tool (ﬁ g. 5)

WARNING: Keep tool pointed in a safe

direction when loading nails.

WARNING: Keep the tool pointed

away from yourself and others. Serious

personal injury may result.

WARNING: Never load nails with

the contact trip or trigger activated.

Personal injury may result.

1. Pull the nail pusher (h) back until it latches.

2. Drop appropriate collated nail sticks into loading

slot on top of mag azine. Refer to Technical Data

to determine appropriate nail sizes and angles.

3. Pull the nail pusher a second time to release

latch, and carefully allow the pusher to slide

forward until it makes contact with the nails.

Dry Fire Lockout

To protect from internal damage, the DEWALT

framing nailers are equipped with a dry fire lockout,

which prevents the tools from actuating when the

magazine is nearly empty. When approximately 4 or

5 nails remain in the magazine and the tool ceases

to operate, follow the loading instructions to reload

sticks of collated nails.

Depth Setting (ﬁ g. 6)

WARNING:To reduce risk of serious

injury from accidental actuation when

attempting to adjust depth, ALWAYS:

• Lock OFF trigger.

• Disconnect air supply.

• Avoid contact with trigger during

adjustments.

Fastener driving depth can be adjusted using the

depth adjustment on the nosepiece of the tool.

1. To adjust depth setting, push button (p), slide

contact trip (d) down then push button (o) in to

set contact trip.

2. To sink a nail deeper, push button (p), slide

contact trip (d) upward to the extent desired,

then push button (o) in to set contact trip.

Clearing a Jammed Nail (ﬁ g. 7, 8)

WARNING: Lock off trigger, disconnect

air line from tool and remove fasteners

from magazine before making

adjustments or personal injury may

result.

If a nail becomes jammed in the nosepiece, keep

the tool pointed away from you and follow these

instructions to clear:

1. Lock off trigger.

2. Disconnect air supply from tool.

3. Pull pusher back to lock position.

4. Remove magazine from tool by removing handle

bracket screw (q), washer (r), nut (s), nosepiece

screw (t) and washer (u). Slide magazine back

until it disconnects from tool housing (fig. 7).

5. Remove bent nail, using pliers if necessary.

6. If driver blade is in the down position, insert

screwdriver or other rod into nosepiece and

push driver blade back in position.

7. Reattach magazine to tool housing by aligning

the front of the magazine (e) between lower

nosepiece supports (v) while aligning the top

guide (w) in front of the upper nosepiece

support (x) (fig. 8).

8. Reattach air supply.

9. Reinsert nails into magazine.

10. Release pusher.

11. Unlock trigger.

NOTE: Should nails continue to jam frequently in

nosepiece, have tool serviced by an authorized

DEWALT service center.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt D51850 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info