Bedienungsanleitung DeWalt dc 300 kl qw (Seite 37 von 192) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

382886

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

ENGLISH

d Never hold piece being cut in your hands

or across your leg. Secure the workpiece

to a stable platform.

It is important to support the work properly

to minimize body exposure, blade binding, or

loss of control.

e Hold power tool by insulated gripping

surfaces when performing an operation

where the cutting tool may contact hidden

wiring or its own cord.

Contact with a “live” wire will also make

exposed metal parts of the power tool “live”

and shock the operator.

f When ripping always use a rip fence or

straight edge guide.

This improves the accuracy of cut and

reduces the chance of blade binding.

g Always use blades with correct size and

shape (diamond versus round) of arbour

holes. Blades that do not match the

mounting hardware of the saw will run

eccentrically, causing loss of control.

h Never use damaged or incorrect blade

washers or bolt.

The blade washers and bolt were specially

designed for your saw, for optimum

performance and safety of operation.

Causes and operator prevention of

kickback

- kickback is a sudden reaction to a pinched,

bound or misaligned saw blade, causing an

uncontrolled saw to lift up and out of the

workpiece toward the operator;

- when the blade is pinched or bound tightly

by the kerf closing down, the blade stalls and

the motor reaction drives the unit rapidly back

toward the operator;

- if the blade becomes twisted or misaligned

in the cut, the teeth at the back edge of the

blade can dig into the top surface of the wood

causing the blade to climb out of the kerf and

jump back toward the operator.

Kickback is the result of saw misuse and/or

incorrect operating procedures or conditions and

can be avoided by taking proper precautions as

given below.

a Maintain a ﬁ rm grip with both hands on

the saw and position your arms to resist

kickback forces. Position your body to

either side of the blade, but not in line with

the blade.

Kickback could cause the saw to jump

backwards, but kickback forces can

be controlled by the operator, if proper

precautions are taken.

b When blade is binding, or when interrupting

a cut for any reason, release the trigger and

hold the saw motionless in the material until

the blade comes to a complete stop. Never

attempt to remove the saw from the work or

pull the saw backward while the blade is in

motion or kickback may occur.

Investigate and take corrective actions to

eliminate the cause of blade binding.

c When restarting a saw in the workpiece,

centre the saw blade in the kerf and check

that saw teeth are not engaged into the

material.

If saw blade is binding, it may walk up or

kickback from the workpiece as the saw is

restarted.

d Support large panels to minimise the risk of

blade pinching and kickback.

Large panels tend to sag under their own

weight. Supports must be placed under the

panel on both sides, near the line of cut and

near the edge of the panel.

e Do not use dull or damaged blades.

Unsharpened or improperly set blades produce

narrow kerf causing excessive friction,

blade binding and kickback.

f Blade depth and bevel adjusting locking

levers must be tight and secure before

making cut.

If blade adjustment shifts while cutting, it may

cause binding and kickback.

g Use extra caution when making a “plunge

cut” into existing walls or other blind areas.

The protruding blade may cut objects that can

cause kickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt dc 300 kl qw Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info