Bedienungsanleitung DeWalt DC 411 (Seite 50 von 220) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

79272

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

ENGLISH

WARNING: Do not use edge grinding/

cutting wheels for surface grinding

applications because these wheels

are not designed for side pressures

encountered with surface grinding.

Wheel breakage and serious personal

injury may result.

Precautions To Take When

Wire Brushing Paint

1. Wire brushing of lead based paint is NOT

RECOMMENDED due to the difficulty of

controlling the contaminated dust. The greatest

danger of lead poisoning is to children and

pregnant women.

2. Since it is difficult to identify whether or not a

paint contains lead without a chemical analysis,

we recommend the following precautions when

wire brushing any paint:

PERSONAL SAFETY

1. No children or pregnant women should enter

the work area where the paint wire brushing is

being done until all clean up is completed.

2. A dust mask or respirator should be worn by all

persons entering the work area. The filter should

be replaced daily or whenever the wearer has

difficulty breathing.

NOTE: Only those dust masks suitable for

working with lead paint dust and fumes should

be used. Ordinary painting masks do not offer

this protection. See your local hardware dealer

for the proper N.I.O.S.H. approved mask.

3. NO EATING, DRINKING or SMOKING should

be done in the work area to prevent ingesting

contaminated paint particles. Workers should

wash and clean up BEFORE eating, drinking

or smoking. Articles of food, drink, or smoking

should not be left in the work area where dust

would settle on them.

ENVIRONMENTAL SAFETY

1. Paint should be removed in such a manner as

to minimize the amount of dust generated.

2. Areas where paint removal is occurring should

be sealed with plastic sheeting of 4 mils

thickness.

3. Wire brushing should be done in a manner to

reduce tracking of paint dust outside the work

area.

CLEANING AND DISPOSAL

1. All surfaces in the work area should be

vacuumed and thoroughly cleaned daily for the

duration of the wire brushing project. Vacuum

filter bags should be changed frequently.

2. Plastic drop cloths should be gathered up and

disposed of along with any dust chips or other

removal debris. They should be placed in sealed

refuse receptacles and disposed of through

regular trash pick-up procedures.

During clean up, children and pregnant women

should be kept away from the immediate work

area.

3. All toys, washable furniture and utensils used by

children should be washed thoroughly before

being used again.

Mounting and Using Wire Brushes

and Wire Wheels

Wire cup brushes or wire wheels screw directly on

the grinder spindle without the use of flanges. Use

only wire brushes or wheels provided with a M14

threaded hub. A Type 27 guard is required when

using wire brushes and wheels.

CAUTION: To reduce the risk of

personal injury, wear work gloves

when handling wire brushes and

wheels. They can become sharp.

CAUTION: To reduce the risk of

damage to the tool, wheel or brush

must not touch guard when mounted

or while in use. Undetectable damage

could occur to the accessory, causing

wires to fragment from accessory wheel

or cup.

MOUNTING WIRE CUP BRUSHES AND WIRE WHEELS

WARNING: To reduce the risk of

serious personal injury, turn tool off

and and remove battery pack before

making any adjustments or removing/

installing attachments or accessories.

1. Thread the wheel on the spindle by hand.

2. Depress spindle lock button and use a wrench

on the hub of the wire wheel or brush to tighten

the wheel.

3. To remove the wheel, reverse the above

procedure.

CAUTION: To reduce the risk of

damage to the tool, properly seat the

wheel hub before turning the tool on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DC 411 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info