Bedienungsanleitung DeWalt DCE080GS (Seite 15 von 232) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790944

Zoom out

Zoom in

Vorherige Seite

1/232

Nächste Seite

Installing the Coin Cell Battery

A coin cell battery should already be installed in the bottom of

the laser unit (Figure D 3) so it is ready to use the Bluetooth®

connection, after you remove the battery protector. To remove the

battery protector on your new laser, or replace the coin cell battery in

the future, follow these steps.

1. Carefully turn the laser upside down.

2. On the bottom of the laser, unscrew the battery compartment

cover, which is marked 3V CR2430.

3. Lift off the battery compartment cover and remove the coin cell

battery.

4. If your laser is new, remove the battery protector (round disc), and

then re-insert the same coin cell battery.

5. If your laser is not new, insert a new 3V CR2430 coin cell battery into

the battery compartment.

6. Carefully place the battery compartment cover back in the correct

position and use the screws to secure the cover in place on the

bottom of the laser unit.

THE BLUETOOTH® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED

BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY DEWALT IS UNDER LI-

CENSE. APPLE AND THE APPLE LOGO ARE TRADEMARKS OF APPLE INC., REGISTERED

IN THE U.S. AND OTHER COUNTRIES. APP STORE IS A SERVICE MARK OF APPLE INC.,

REGISTERED IN THE U.S. AND OTHER COUNTRIES. GOOGLE PLAY AND THE GOOGLE

PLAY LOGO ARE TRADEMARKS OF GOOGLE INC.

Installing Batteries in the Remote

Load new AAA batteries into the remote so you can use it with the

laser unit.

1. On the bottom of the remote, lift up the latch to open the battery

compartment cover (Figure C 1).

2. Insert two new, high-quality, name brand AAA batteries, making

sure to position the - and + ends of each battery as noted inside

the battery compartment (Figure C 2).

3. Push the battery compartment cover closed until it snaps into

place (Figure C 3).

Charging the Detector

The Digital Laser Detector is powered by a Li-ion battery. To charge

the battery.

1. Insert the USB end of the charging cable into a USB port (Figure

E 1).

2. On the Detector, pull the Micro USB port cover (Figure E 2) off

and to the side.

3. Insert the Micro USB end of the charging cable into the

Detector's Micro USB port (Figure E 3).

4. Allow the Detector time to fully-charge. The LED on the Detector

will remain Red as the battery is charging (Figure F 13 ).

5. When the LED on the Detector turns Green, remove the

charging cable.

Operating Tips

• To extend battery life per charge, turn the laser off when it is not

in use.

• To ensure the accuracy of your work, check the laser calibration

often. Refer to Calibrating the Laser.

• Before attempting to use the laser, make sure the tool is positioned

on a relatively smooth, secure surface.

• Always mark the center of the laser line or dot. If you mark different

parts of the beam at different times you will introduce error into

your measurements.

• To increase working distance and accuracy, set up the laser in the

middle of your working area.

• When attaching to a tripod or wall, mount the laser securely.

• When working indoors, a slow rotary head speed will produce

a visibly brighter line, a faster rotary head speed will produce

a visibly solid line.

• To increase beam visibility, wear Laser Enhancement Glass es

(Figure S) and/or use a Laser Target Card (Figure R) to help find

the beam.

• Extreme temperature changes can cause movement or shifting of

building structures, metal tripods, equipment, etc., which can effect

accuracy. Check your accuracy often while working.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCE080GS Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info