Bedienungsanleitung DeWalt DCF680 T 1 (Seite 9 von 16) (Englisch)

549690

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

HOT/COLD DELAY

This charger has a hot/cold delay feature: when the charger detects a battery that is

hot, it automatically starts a delay, suspending charging until the battery has cooled.

After the battery has cooled, the charger automatically switches to the pack charging

mode. This feature ensures maximum battery life. The red light flashes long, then

short while in the hot/cold delay mode.

LEAVING THE BATTERY PACK IN THE CHARGER

The charger and battery pack can be left connected with the charge indicator showing

Pack Charged.

WEAK BATTERY PACKS: Weak batteries will continue to function but should not be

expected to perform as much work.

FAULTY BATTERY PACKS: This charger will not charge a faulty battery pack. The

charger will indicate faulty battery pack by refusing to light or by displaying problem pack

or charger.

NOTE: This could also mean a problem with a charger.

Important Charging Notes

1. Longest life and best performance can be obtained if the battery pack is charged

when the air temperature is between 18 ° – 24 °C (65 °F and 75 °F). DO NOT

charge the battery pack in an air temperature below +4 °C (+40 °F), or above

+40 °C (+105 °F). This is important and will prevent serious damage to the

battery pack.

2. The charger and battery pack may become warm to the touch while charging.

This is a normal condition, and does not indicate a problem. To facilitate the

cooling of the battery pack after use, avoid placing the charger or battery pack in

a warm environment such as in a metal shed or an uninsulated trailer.

3. A cold battery pack will charge at about half the rate of a warm battery pack. The

battery pack will charge at that slower rate throughout the entire charging cycle

and will not return to maximum charge rate even if the battery pack warms.

4. If the battery pack does not charge properly:

a. Check operation of receptacle by plugging in a lamp or other appliance;

b. Check to see if receptacle is connected to a light switch which turns power off

when you turn out the lights;

c. Move the charger and battery pack to a location where the surrounding air

temperature is approximately 18 ° – 24 °C (65 °F and 75 °F);

d. If charging problems persist, take the tool, battery pack and charger to your

local service center.

5. The battery pack should be recharged when it fails to produce sufficient power

on jobs which were easily done previously. DO NOT CONTINUE to use under

these conditions. Follow the charging procedure. You may also charge a partially

used pack whenever you desire with no adverse effect on the battery pack.

6. Foreign materials of a conductive nature such as, but not limited to, grinding dust,

metal chips, steel wool, aluminum foil, or any buildup of metallic particles should

be kept away from charger cavities. Always unplug the charger from the power

supply when there is no battery pack in the cavity. Unplug the charger before

attempting to clean.

7. Do not freeze or immerse the charger in water or any other liquid.

WARNING: Shock hazard. Don’t allow any liquid to get inside the charger. Electric

shock may result.

WARNING: Burn hazard. Do not submerge the battery pack in any liquid or allow

any liquid to enter the battery pack. Never attempt to open the battery pack for any

reason. If the plastic housing of the battery pack breaks or cracks, return to a service

center for recycling.

Storage Recommendations

1. The best storage place is one that is cool and dry, away from direct sunlight and

excess heat or cold.

2. For long storage, it is recommended to store a fully charged battery pack in a

cool dry place out of the charger for optimal results.

NOTE: Battery packs should not be stored completely depleted of charge. The battery

pack will need to be recharged before use.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR

FUTURE REFERENCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCF680 T 1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DCF680 T 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info