Bedienungsanleitung DeWalt DCF813 T 3 (Seite 37 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

549695

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

ENGLISH

Regardless of whether a shipment is considered

excepted or fully regulated, it is the shipper's

responsibility to consult the latest regulations for

packaging, labeling/marking and documentation

requirements.

Transporting batteries can possibly cause fire if the

battery terminals inadvertently come in contact with

conductive materials. When transporting batteries,

make sure that the battery terminals are protected

and well insulated from materials that could contact

them and cause a short circuit.

The information provided in this section of the

manual is provided in good faith and believed to be

accurate at the time the document was created.

However, no warranty, expressed or implied, is

given. It is the buyer’s responsibility to ensure that its

activities comply with the applicable regulations.

Battery Pack

BATTERY TYPE

The DCF813 and DCF815 operate on 10.8 V battery

packs.

Storage Recommendations

1. The best storage place is one that is cool and

dry away from direct sunlight and excess heat

or cold. For optimum battery performance and

life, store battery packs at room temperature

when not in use.

2. For long storage, it is recommended to store a

fully charged battery pack in a cool, dry place

out of the charger for optimal results.

NOTE: Battery packs should not be stored

completely depleted of charge. The battery pack will

need to be recharged before use.

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual,

the labels on the charger and the battery pack may

show the following pictographs:

Read instruction manual before use.

See Technical Data for charging time.

100%

Battery charging.

100%

Battery charged.

Battery defective.

Hot/cold pack delay.

Do not probe with conductive objects.

Do not charge damaged battery packs.

Do not expose to water.

Have defective cords replaced

immediately.

Charge only between 4 ˚C and 40 ˚C.

Only for indoor use.

Discard the battery pack with due care for

the environment.

Charge DEWALT battery packs only with

designated DEWALT chargers. Charging

battery packs other than the designated

DEWALT batteries with a DEWALT

charger may make them burst or lead to

other dangerous situations.

Do not incinerate the battery pack.

Package Contents

The package contains:

1 Cordless impact driver or impact wrench

1 Charger

2 Battery packs

1 Impact rated screwdriver bit (DCF815)

1 Kitbox

1 Instruction manual

1 Exploded drawing

NOTE: Battery packs and chargers are not included

with N-models.

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCF813 T 3 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DCF813 T 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info