Bedienungsanleitung DeWalt DCF888 (Seite 36 von 156) (Alle Sprachen)

723570

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

ENGLISH

Worklights(Fig.A)

CAUTION: Do not stare into worklight. Serious eye

injury couldresult.

The three worklights7 located around the chuck collar3 are

activated when the trigger switch is depressed. In the factory

default mode, when the trigger is released, the worklight will

stay illuminated for up to 20 seconds. If the trigger switch

remains depressed, the worklights will remain on. These settings

can be customized using the Tool Connect™ app. Refer to

ModeSelector.

NOTE: The worklights are for lighting the immediate work

surface and are not intended to be used as aflashlight.

Mode Selector(Fig.A,D)

WARNING: To reduce the risk of injury, remove

accessories from the tool chuck before using the

modeselector.

Your tool is equipped with a mode selector that allows modes 1,

2, and 3 to be customized using the Tool Connect™ app. Home

settings are active when the home indicator15 is lit. Refer to

Table 1 for customizablefeatures.

Once configured, pressing the mode selector button11

on the foot of the tool will cycle through the modes14 . If

you are unsure of the current configuration, press the mode

selector button11 to set the tool to the Home setting(home

indicator15 is lit).

DeWALT

Tool Connect™ (Fig.D)

WARNING: To reduce the risk of injury, remove accessories

from the tool chuck before any Tool Connect™interaction.

NOTICE: Always check the tool configuration prior to

use. If you are unsure of the current configuration, press

the mode selector button11 (Fig. D) to set the tool to the

Home setting as described on the label and thismanual.

This tool is capable of connecting with mobile devices that

support Bluetooth® Smart(or Bluetooth® 4.0) technology.(To

see if your mobile device is compatible, visit: http://www.

bluetooth.com/Pages/Bluetooth-Smart-Devices-List.aspx)

DeWALT

Tool Connect™ is an optional application for your

smart device(such as a smart phone or tablet) that connects

the device to your tool to allow you to configure specific tool

functions. Refer to ModeSelector.

NOTE: The Bluetooth® word mark and logos are registered

trademarks owned by the Bluetooth®, SIG, Inc. and any use of

such marks by

DeWALT

is under license. Other trademarks and

trade names are those of their respectiveowners.

NOTE: The Tool Connect™ App is governed by separate

terms and conditions available for viewing through the

mobileapplication.

Download the

DeWALT

Tool Connect™ applicationat:

• Install a fully charged 18V battery pack into the tool. Refer to

Inserting and Removing the Battery Pack from theTool.

• Follow the instructions in the app to create your Tool

Connect™account.

• On the Home screen of the app, select "+ Tool" to begin the

process of adding your tool to theapp.

• To connect your tool with the

DeWALT

Tool Connect™

app, at the appropriate screen, press the mode selector

button11 for 3–5 seconds, then wait for the tool to

connect. The tool can only be connected to one Tool

Connect™ account at atime.

• Once the tool has been connected, you can confirm that

you would like to register theproduct.

Coin Cell Battery

Bluetooth® capability is powered by one coin cell battery in

your tool, that when necessary, should be replaced by your local

DeWALT

service center. Do not attempt to replace the coin cell

batteryyourself.

WARNING: Danger of explosion if battery is

incorrectlyreplaced.

WARNING: DO NOT INGEST BATTERY; CHEMICAL

BURN HAZARD. This product contains a coin/button cell

battery. If the coin/button cell battery is swallowed, it can

cause severe internal burns in just 2hours and can lead

todeath.

• Keep new and used batteries away from children. If

the battery compartment does not close securely, stop

using the product and keep it away fromchildren.

• If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medicalattention.

• If the coin cell battery contents come into contact

with the skin, immediately wash area with mild soap

and water. If coin cell battery liquid gets into the eye,

rinse water over the open eye for 15 minutes or until

irritation ceases. If medical attention is needed, the

battery electrolyte is composed of an organic solvent

and lithiumsalts.

TABLE 1

Customizable Features Home

Factory Presets

Customizable RangeMode 1 Mode 2 Mode 3

Worklight brightness High High High High OFF–High

Worklight delay off 20 secs 20 secs 20 secs 20 secs 0–20 minutes

Maximum speed (RPM) 3250 1000 2800 3250 1000–3250

Precision Drive hesitation (seconds) Disabled 1Disabled Disabled 0–1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCF888 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info