Bedienungsanleitung DeWalt DCMWSP564 (Seite 40 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

790949

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

ENGLISH

Variable Speed Self Drive System (Fig. L)

DANGER: Sharp moving blade. Never attempt to

override the operation of the switch box, the self

drive system or the safety key system as serious

injury couldresult.

Your mower is equipped with variable speed self drive. This

system is dependent on the blade ON‑OFF switch. It can only be

used with the blade spinning.

1. Follow Starting Mowerinstructions.

2. To turn on self drive, hold blade bail handle5 in place

against the main handle4 with onehand.

3. Pull the self speed lever6 toward the main handle with

your otherhand.

4. You can hold just the speed lever6 or hold both bail

handle5 and speed leversimultaneously.

5. To turn off self drive, release the speed lever6.

Starting Mower (Fig. I–L)

DANGER: Sharp moving blade. Never attempt to

override the operation of the switch box and safety

key system as serious injury couldresult.

WARNING: Ensure self drive is disengaged before starting

the mower

NOTE: Mower is operational when battery packs and safety key

areinstalled.

1. Lift and hold the battery port cover10 up to expose the

battery port26.

2. Slide a battery pack23 into the battery port26 until an

audible click is heard. Repeat this process for the second

batteryport.

NOTE: Ensure the battery packs are fully seated and fully

latched intoposition before startingmower.

3. Close the battery port cover. Ensure the cover is fully closed

before startingmower.

4. Insert safety key3 into the ON‑OFF switch box1 until it is

fully seated inside housing. The mower is nowoperational.

5. Your mower is equipped with a special ON‑OFF switch

box1. To operate the mower, push and hold the ON‑OFF

button2 on the ON‑OFF switch box1, then pull the bail

handle5 to the main handle4.

NOTE: Once the mower starts you can release

theON‑OFFbutton, but you must continue to hold the bail

handle to themain handle for the mower torun.

6. To turn the mower OFF, release the bailhandle5 .

WARNING: Never attempt to lock a switch or bail handle

in the ONposition.

NOTE: Once the bail handle has returned to the original position

it will activate the “Automatic Braking Mechanism”. The motor is

braked and the mower blade will stop rotating in three seconds

orless. If mower blade rotates longer than three seconds,

discontinue using mower and have itserviced.

Safety Key (Fig. J)

DANGER: Sharp moving blade. In order to prevent

accidental start-up or unauthorized use of your

cordless mower, a removable safety key3 has been

incorporated into the design of your mower. The mower

will be completely disabled when the safety key has been

removed from themower.

DANGER: Rotating blades can cause serious injury.

To prevent serious injury, turn unit off and remove safety

key and battery packs when unattended, or when

charging, cleaning, servicing, transporting, lifting, or

storingmower.

Installing and Removing the Battery Packs

(Fig. I)

DANGER: MAKE CERTAIN THE SAFETY KEY IS

REMOVED TO PREVENT ACTUATION BEFORE

REMOVING OR INSTALLINGBATTERIES.

This mower is designed to operate on two battery packs of

equal capacity. The mower will not operate on a single battery

pack, and If using different capacity battery packs, the smaller

capacity battery pack, when depleted, will cause the unit to

turnoff.

NOTE: For best results, make sure the battery packsd are

fullycharged.

To Install the Battery Packs

1. Lift and hold the battery port cover10 up to expose the

battery ports18.

2. Slide a battery pack23 into the battery port until an audible

click is heard. Repeat for the second battery

NOTE: Ensure the battery packs are fully seated and fully latched

intoposition before startingmower.

3. Close the battery port cover. Ensure the cover is fully closed

before startingmower.

To Remove the Battery Packs

1. Lift and hold the battery port cover up to expose the

batteryports.

2. Depress the battery release button24 on the battery packs

and pull the battery packs out oftool.

DANGER: Do not operate mower unless handle is locked

intoposition.

DANGER: Sharp moving blade. Never operate the

mower in bagging mode unless the bag lugs on the grass

collection bag are seated properly on the mower and the

rear discharge door rests firmly against the top of the grass

collection bag as serious injury couldresult.

WARNING: Let the mower work at its own pace. Do

notoverload.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DCMWSP564 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info