Bedienungsanleitung DeWalt DW 152 (Seite 27 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78842

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

ENGLISH

Instructions for Use

WARNING: Always observe the safety

instructions and applicable regulations.

WARNING: Apply only a gentle

pressure to the tool. Excessive force

decreases tool performance and may

shorten tool life.

Proper Holding Position (ﬁ g. 4)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper holding position requires the breast plate

against the torso, as shown, with:

– one hand on the threaded side handle (e) and

the other hand on the carrying handle (d),

– one hand on the threaded side handle (e) and

one hand on the control side handle (f).

Using the Drill as a Hand-held Tool

(ﬁ g. 1)

1. Fit the side handles and the breast plate.

2. Insert the appropriate accessory.

3. Select the direction of rotation.

4. Select the appropriate speed/torque ratio.

To run the tool, press the on/off switch (a) in the

control side handle (f).

To stop the tool, release the switch.

Always switch off the tool when work is finished and

before unplugging.

Mixing

• For mixing, fit an appropriate mixing accessory.

WARNING: Do not mix or stir

inflammable liquids labelled accordingly.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing set-

ups or when making repairs. Be sure

the trigger switch is in the OFF position.

An accidental start-up can cause injury.

This machine is not user-serviceable. Take the

tool to an authorised D

EWALT repair agent after

approximately 150 hours of use. If problems occur

before this time contact an authorised D

EWALT

repair agent.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

soap. Never let any liquid get inside the

tool; never immerse any part of the tool

into a liquid.

Optional Accessories

WARNING: Since accessories, other

than those offered by DEWALT, have

not been tested with this product, use

of such accessories with this tool could

be hazardous. To reduce the risk of

injury, only DEWALT, recommended

accessories should be used with this

product.

Consult your dealer for further information on the

appropriate accessories.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW 152 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info