Bedienungsanleitung DeWalt DW160 T 2 (Seite 16 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

544730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

en - 2

Safety instructions

When using Power Tools, always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and

personal injury. Read the following safety

instructions before attempting to operate this

product.

Keep these instructions in a safe place!

General

1 Keep work area clean

Cluttered areas and benches can cause

accidents.

2 Consider work area environment

Do not expose Power Tools to humidity. Keep

work area well lit. Do not use Power Tools in the

presence of inflammable liquids or gases.

3 Guard against electric shock

Prevent body contact with earthed surfaces (e.g.

pipes, radiators, cookers and refrigerators).

For use under extreme conditions (e.g. high

humidity, when metal swarf is being produced,

etc.) electric safety can be improved by inserting

an isolating transformer or a (FI) earth-leakage

circuit-breaker.

4 Keep children away

Do not let children come into contact with the

tool or extension cord. Keep all people away

from the work area.

5 Extension cords for outdoor use

When the tool is used outdoors, always use

extension cords intended for outdoor use and

marked accordingly.

6 Store idle tools

When not in use, Power Tools must be stored in

a dry place and locked up securely, out of reach

of children.

7 Dress properly

Do not wear loose clothing or jewellery. They can

be caught in moving parts. Preferably wear

rubber gloves and non-slip footwear when

working outdoors. Wear protective hair covering

to keep long hair out of the way.

8 Wear safety goggles

Also use a face or dust mask in case the

operations produce dust or flying particles.

9 Beware of maximum sound pressure

Take appropriate measures for the protection of

hearing if the sound pressure of 85 dB(A) is

exceeded.

10 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

11 Do not overreach

Keep proper footing and balance at all times.

12 Avoid unintentional starting

Do not carry the plugged-in tool with a finger on

the switch. Be sure that the switch is released

when plugging in.

13 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

14 Disconnect tool

Shut off power and wait for the tool to come to a

complete standstill before leaving it unattended.

Unplug the tool when not in use, before servicing

or changing accessories.

15 Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches

are removed from the tool before operating the

tool.

16 Use appropriate tool

The intended use is laid down in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended.

Warning! The use of any accessory or

attachment or performance of any operation with

this tool, other than those recommended in this

instruction manual may present a risk of personal

injury.

17 Do not abuse cord

Never carry the tool by its cord or pull it to

disconnect from the socket. Keep the cord away

from heat, oil and sharp edges.

18 Maintain tools with care

Keep the tools in good condition and clean for

better and safer performance. Follow the

instructions for maintenance and changing

accessories. Inspect the tool cords at regular

intervals and, if damaged, have them repaired by

an authorized DeWALT repair agent. Inspect the

extension cords periodically and replace them if

damaged. Keep all controls dry, clean and free

from oil and grease.

19 Check for damaged parts

Before using the tool, carefully check it for

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW160 T 2 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info