Bedienungsanleitung DeWalt DW263K T 4 (Seite 28 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

549014

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

ENGLISH

Using a Nutsetter (ﬁ g. 3)

DW263/DW264

1. For screws with sealing washers, turn the collar

(d) until the end of the nutsetter is flush with the

end of the depth locator.

If required, turn the collar until the nutsetter is

recessed approximately 2 mm into the depth

locator.

NOTE: ALWAYS refer to the screw

manufacturer’s specifications for the proper

sealing washer settings in different applications.

2. Drive a screw into a scrap piece and check the

distance between the washer and the material.

3. Turn the collar (d) counterclockwise or clockwise

to decrease or increase the driving depth as

required.

4. Drive another screw and readjust the collar (d)

until the desired setting is achieved.

Depth Locator (ﬁ g. 4)

DW263/DW264

This model is supplied with two depth locators (e) to

accommodate different bits, holders, sockets and

adaptors.

TO CHANGE DEPTH LOCATORS

1. Pull the collar (d) assembly off the tool.

2. Hold the depth locator (e) and unscrew the

collar (d).

3. Replace the depth locator (e).

4. To reassemble, proceed in reverse order.

Forward/Reverse Switch (ﬁ g. 5)

WARNING: Always wait until the motor

has come to a complete standstill

before changing the direction of rotation.

Select the forward or reverse rotation by moving the

forward/reverse switch (c) in the direction indicated

by the arrows.

OPERATION

Instructions for Use

WARNING: To reduce the risk

of serious personal injury, turn

tool off and disconnect tool from

power source before making any

adjustments or removing/installing

attachments or accessories.

WARNING: Always observe the safety

instructions and applicable regulations.

Proper Hand Position (ﬁ g. 6)

WARNING: To reduce the risk of

serious personal injury, ALWAYS use

proper hand position as shown.

WARNING: To reduce the risk of

serious personal injury, ALWAYS hold

securely in anticipation of a sudden

reaction.

Proper hand position requires one hand on the main

handle (n), as shown.

For best results, hold the screwdriver with the

hand directly in line with the fastener and press

the variable speed switch with the last one or

two fingers of the hand, as shown. This reduces

the chance of the screw slipping from the drive

accessory when pressure is applied.

Screwdriving or Nutsetting (ﬁ g. 1A)

1. Select the appropriate bit for the screw (or nut)

to be driven.

2. Select forward or reverse rotation as described

above.

DW263: For nutsetting, always use the correct

depth locator (e).

3. To run the tool, press the variable speed switch

(a). The pressure exerted on the variable speed

switch determines the tool speed.

NOTE: If necessary, press the lock-on button

(b) for continuous operation and release the

variable speed switch. The lock-on button

only works in full speed, forward and reverse

rotation.

To stop the tool in continuous operation, press

the switch briefly and release it.

WARNING: ALWAYS turn the tool

off when work is finished and before

unplugging.

4. To drive the screw, place it on the bit or into

the socket, press the variable speed switch

and push the screw into the workpiece with a

smooth, continuous motion. When the screw

is seated, a buzzing sound will come from the

front of the tool to indicate that the clutch has

disengaged.

5. To stop the tool, release the switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW263K T 4 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DW263K T 4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info