Bedienungsanleitung DeWalt DW274KN T 2 (Seite 23 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

548890

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

18 en - 5

ENGLISH

• To insert the accessory (e.g. a bit holder or

nutsetter) (7) push it into the holder (8) until it

snaps in place. Tap it lightly if required.

• To remove the accessory pull it out of the holder

using a pair of pliers.

• Reinstall the collar (4) by aligning the ribs (9) on

the inside of the collar (4) with the grooves (10) in

the clutch housing and snap the collar in place.

DW268K/DW269K (fig. A)

• Pull the ball retainer (5) to the front and hold it.

• Insert the accessory.

• Release the ball retainer.

Replacing the bit tip (fig. B)

• Simply pull out the bit tip (11). A pair of pliers may

be required.

DW263K/DW274K/DW274KN -

Setting the driving depth (fig. C)

The depth sensitive feature offers the following

advantages:

- the selected driving depth is repeatable for

structural integrity

- screws with sealing washers are driven correctly

so that no leaks occur

The driving depth is determined by the position of

the depth locator (5) in relation to the bit or socket.

The symbols on the collar indicate how to set the

driving depth.

• Turn the collar clockwise to increase the driving

depth.

• Turn the collar counterclockwise to decrease the

driving depth.

DW263K - When using a nutsetter

• For screws with sealing washers, turn the

adjustment collar until the end of the nutsetter is

flush with the end of the depth locator.

• If required, turn the collar until the nutsetter is

recessed approximately 2 mm into the depth

locator.

• Also refer to the screw manufacturer’s

specifications for the proper sealing washer

settings in different applications.

• Drive a screw into a waste piece and check the

distance between the washer and the material.

• Turn the collar (4) counterclockwise or clockwise

to decrease or increase the driving depth as

required.

• Drive another screw and readjust the collar (4)

until the desired setting is achieved.

DW263K - Replacing the depth locator (fig. D)

This model is supplied with two depth locators (5) to

accommodate different bits, holders, sockets and

adaptors.

• Pull the collar assembly off the tool.

• Hold the depth locator (5) and unscrew the collar (4).

• Replace the depth locator (5).

• To reassemble, proceed in reverse order.

DW268K/DW269K - Setting the torque (fig. A)

This model allows setting the torque for a wide

range of screws.

• To increase the torque, turn the torque

adjustment collar (4) counterclockwise.

• To decrease the torque, turn the torque

adjustment collar (4) clockwise.

• Drive a screw into a waste piece and check if the

screw is properly fastened.

• If the clutch ratchets unexpectedly (for example

when a wood knot is encountered),

simply increase the pressure on the tool.

Setting the direction of rotation (fig. E)

• Select forward or reverse rotation using the

forward/reverse switch (3) (see arrows on tool).

Always wait until the motor has come to

a complete standstill before changing the

direction of rotation.

Instructions for use

Always observe the safety instructions

and applicable regulations.

Screwdriving or nutsetting (fig. A)

• Select the appropriate bit for the screw (or nut) to

be driven.

• Select forward or reverse rotation as described

above.

• For nutsetting (DW263K) always use the correct

depth locator (5).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW274KN T 2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info