Bedienungsanleitung DeWalt DW540 (Seite 22 von 91) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

544675

Zoom out

Zoom in

Vorherige Seite

1/91

Nächste Seite

ENGLISH

10 Secure workpiece

Use clamps or a vice to hold the workpiece. It is

safer and it frees both hands to operate the tool.

11 Do not overreach

Keep proper footing and balance at all times.

12 Avoid unintentional starting

Do not carry the plugged-in tool with a finger on

the switch. Be sure that the switch is released

when plugging in.

13 Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

14 Disconnect tool

Shut off power and wait for the tool to come to a

complete standstill before leaving it unattended.

Unplug the tool when not in use, before servicing

or changing accessories.

15 Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are

removed from the tool before operating the tool.

16 Use appropriate tool

The intended use is laid down in this instruction

manual. Do not force small tools or attachments

to do the job of a heavy-duty tool. The tool will

do the job better and safer at the rate for which it

was intended.

Warning! The use of any accessory or attachment

or performance of any operation with this tool, other

than those recommended in this instruction manual

may present a risk of personal injury.

17 Do not abuse cord

Never carry the tool by its cord or pull it to

disconnect from the socket. Keep the cord away

from heat, oil and sharp edges.

18 Maintain tools with care

Keep the tools in good condition and clean for better

and safer performance. Follow the instructions for

maintenance and changing accessories. Inspect the

tool cords at regular intervals and, if damaged, have

them repaired by an authorized DEWALT repair

agent. Inspect the extension cords periodically and

replace them if damaged. Keep all controls dry,

clean and free from oil and grease.

19 Check for damaged parts

Before using the tool, carefully check it for

damage to ensure that it will operate properly

and perform its intended function. Check for

misalignment and seizure of moving parts,

breakage of parts and any other conditions that

may affect its operation. Have damaged guards

or other defective parts repaired or replaced as

instructed. Do not use the tool if the switch is

defective. Have the switch replaced by an

authorized DEWALT repair agent.

20 Have your tool repaired by an authorized

DEWALT repair agent

This Power Tool is in accordance with the

relevant safety regulations. To avoid danger,

electric appliances must only be repaired by

qualified technicians.

Package contents

The package contains:

1 Rotary Hammer

1 Side handle

1 Depth adjustment rod

1 Tube of bit lubricant

1 Kitbox (K-models only)

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A)

Your DEWALT Rotary Hammer has been designed

for professional hammer drilling and light chipping,

chiselling and demolition applications.

1 ON/OFF-switch

2 Electronic speed and impact control dial

(DW541/DW545)

3 Power-ON indicator LED (DW541/DW545)

4 Service indicator LED (DW541/DW545)

5 Mode selector lever with safety lock (16)

6 Tool holder for SDS-max

accessories

7 Collar

8 Side handle

9 Side handle clamp wheel

10 Rear side handle position

11 Depth adjustment rod

12 Switch handle cover

13 Lower service access cover

14 Upper service access cover

15 Gearbox access cover

16 Safety lock

en - 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW540 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info