Bedienungsanleitung DeWalt DW711 T 6 (Seite 26 von 116) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

545012

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

ENGLISH

TABLE TOP MITRE SAW

DW711

Identify additional safety measures to protect the operator

from the effects of vibration such as: maintain the tool and

the accessories, keep the hands warm, organisation of work

patterns.

Fuses:

Europe 230 V tools 10 Amperes, mains

U.K. & Ireland 230 V tools 13 Amperes, in plugs

NOTE: This device is intended for the connection to a power supply system

with maximum permissible system impedance Zmax of 0.30  at the

interface point (power service box) of user’s supply.

The user has to ensure that this device is connected only to a power system

which fulfils the requirement above. If necessary, the user can ask the public

power supply company for the system impedance at the interface point.

Deﬁ nitions: Safety Guidelines

The definitions below describe the level of severity for each signal word.

Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if

not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

NOTICE: Indicates a practice not related to personal injury

which, if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.

EC-Declaration of Conformity

MACHINERY DIRECTIVE

DW711

DEWALT declares that these products described under “technical data” are

in compliance with:

2006/42/EC, EN 61029-1, EN 61029-2-11.

These products also comply with Directive 2004/108/EC. For more

information, please contact DEWALT at the following address or refer to the

back of the manual.

The undersigned is responsible for compilation of the technical file and

makes this declaration on behalf of DEWALT.

Horst Grossmann

Vice President Engineering and Product Development

DEWALT, Richard-Klinger-Straße 11,

D-65510, Idstein, Germany

01.01.2010

Safety Instructions

WARNING! When using electric tools basic safety precautions

should always be followed to reduce the risk of fire, electric

shock and personal injury including the following.

Read all these instructions before attempting to operate this product and

save these instructions.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Congratulations!

You have chosen a DEWALT tool. Years of experience, thorough product

development and innovation make DEWALT one of the most reliable

partners for professional power tool users.

Technical Data

DW711 DW711-LX

Voltage V 230 115

Type 6 6

Power input W 1,300 1,100

Power output W 900 800

Max. blade speed min

-1

2 950 2 950

blade diameter mm 260 260

blade bore mm 30 30

Blade body thickness mm 2.0 2.0

Riving knife thickness mm 2.3 2.3

Riving knife hardness mm 43 ±5 43 ±5

Weight kg 20 20

CUTTTING CAPACITIES

Mitre saw mode

Mitre (max. positions) left 50˚ 50˚

right 50˚ 50˚

Bevel (max. positions) left 48˚ 48˚

right 0˚ 0˚

At 90˚, at max. height 50 mm,

max. width of cut mm 134 134

At 45˚ mitre, at max. height 50 mm,

max. width of cut mm 94 94

At 45˚ bevel, at max. height 45 mm,

max. width of cut mm 134 134

At 90˚, at max. depth of cut 96 mm, max width 20 mm, max. cut off 15 mm

Saw bench mode

Max. depth of cut mm 0-50 0-50

(sound pressure) dB(A)

90 90

(sound pressure uncertainty) dB(A)

3 3

(sound power) dB(A)

103 103

(sound power uncertainty) dB(A)

3.7 3.7

Vibration total values (triax vector sum) determined according to EN 61029:

Vibration emission value a

m/s²

1.9 1.9

Uncertainty K = m/s²

1.5 1.5

The vibration emission level given in this information sheet has been

measured in accordance with a standardised test given in EN 61029

and may be used to compare one tool with another. It may be used for a

preliminary assessment of exposure.

WARNING: The declared vibration emission level represents

the main applications of the tool. However if the tool is used

for different applications, with different accessories or poorly

maintained, the vibration emission may differ. This may

significantly increase the exposure level over the total working

period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may

significantly reduce the exposure level over the total working

period.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW711 T 6 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info