Bedienungsanleitung DeWalt DW718 T 2 (Seite 30 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

546169

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

ENGLISH

• Replace the kerf plate when worn.

• Disconnect the machine from the mains before carrying out any

maintenance work or when changing the blade.

• Never perform any cleaning or maintenance work when the machine is

still running and the head is not in the rest position.

• When possible, always mount the machine to a bench.

• If you use a laser to indicate the cutting line, make sure that the laser is

of class 2 according to EN 60825-1:2001. Do not replace a laser diode

with a different type. If damaged, have the laser repaired by an

authorised repair agent.

• The front section of the guard is louvred for visibility while cutting.

Although the louvres dramatically reduce flying debris, there are

openings in the guard and safety glasses should be worn at all times

when viewing through the louvres.

Residual risks

The following risks are inherent to the use of saws:

- injuries caused by touching the rotating parts

In spite of the application of the relevant safety regulations and the

implementation of safety devices, certain residual risks cannot be avoided.

These are:

- Impairment of hearing.

- Risk of accidents caused by the uncovered parts of the rotating saw blade.

- Risk of injury when changing the blade.

- Risk of squeezing fingers when opening the guards.

- Health hazards caused by breathing dust developed when sawing

wood, especially oak, beech and MDF.

Package contents

The package contains:

1 Assembled mitre saw

1 Blade spanner

1 Saw blade

1 Dustbag

1 Instruction manual

1 Exploded drawing

• Check for damage to the tool, parts or accessories which may have

occurred during transport.

• Take the time to thoroughly read and understand this manual prior to

operation.

Description (fig A1 - A7)

Your DW718 mitre saw has been designed for professional cutting of wood,

wood products, aluminium and plastics. It will perform the sawing operations

of cross-cutting, bevelling and mitring easily, accurately and safely.

1 On/off switch

2 Moveable lower blade guard

3 Fence left-hand side

4 Mitre lever

5 Mitre latch

6 Mitre latch override lever

7 Mitre scale

8 Fence right-hand side

9 Kerf plate

10 Carrying handle

11 Operating handle

12 Head lock up release lever

13 Electronic speed control dial

14 Spindle lock

15 Bevel scale

16 Rail lock knob

17 Grooving stop

18 Dust spout

19 Fixed upper blade guard

20 Bevel latch/lever

21 Bevel clamp handle

22 Head lock down pin

23 Blade spanner

24 Hand indentation

25 Bench mounting holes

26 Dustbag

Optional accessories

27 Work support extension

28 Adjustable length stop

29 Work piece clamp

30 Laser

Electrical safety

The electric motor has been designed for one voltage only. Always check

that the power supply corresponds to the voltage on the rating plate.

Your tool is double insulated in accordance with EN 61029;

therefore no earth wire is required.

Mains plug replacement

(U.K. & Ireland only)

• Should your mains plug need replacing and you are competent to do

this, proceed as instructed below. If you are in doubt, contact an

authorized DEWALT repair agent or a qualified electrician.

• Disconnect the plug from the supply.

• Cut off the plug and dispose of it safely; a plug with bared copper

conductors is dangerous if engaged in a live socket outlet.

• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly

rated fuse (1).

• The cable wire colours, or a letter, will be marked at the connection

points of most good quality plugs. Attach the wires to their respective

points in the plug (see below). Brown is for Live (L) (2) and Blue is for

Neutral (N) (4).

• Before replacing the top cover of the mains plug ensure that the cable

restraint (3) is holding the outer sheath of the cable firmly and that the

two leads are correctly fixed at the terminal screws.

Never use a light socket.

Never connect the live (L) or neutral (N) wires to the earth pin

marked E or .

Fitting a mains plug to 115 V units (U.K. & Ireland only)

• The plug should be fitted by a competent person. If you are in doubt,

contact an authorized DEWALT repair agent or a qualified electrician.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DW718 T 2 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info