Bedienungsanleitung DeWalt DWE4120 (Seite 42 von 208) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

712337

Zoom out

Zoom in

Vorherige Seite

1/208

Nächste Seite

english

DATE CODE POSITION (FIG. 1)

The date code(P), which also includes the year of

manufacture, is printed at the front of the gear case.

Example:

2018 XX XX

Year of Manufacture

Package Contents

The package contains:

1 Angle grinder

1 Guard

1 Side handle

1 Flange set

1 Hex key

1 Instruction manual

• Check for damage to the tool, parts or

accessories which may have occurred during

transport.

• Take the time to thoroughly read and

understand this manual prior to operation.

Description (ﬁg. 1, 3)

WARNING: Never modify the power

tool or any part of it. Damage or personal

injury could result.

A. Spindle lock button

B. Spindle

C. Side handle

D. Backing flange

E. Threaded clamp nut

F. Guard

G. Slider switch

H. Paddle switch (DWE4120 only)

I. Lock-off lever (DWE4120 only)

J. Guard release lever

INTENDED USE

The DWE4056, DWE4057, DWE4120, DWE4156,

DWE4157 heavy-duty angle grinders have been

designed for professional grinding, sanding, wire

brushing and cutting applications.

DO NOT use grinding wheels other than centre

depressed wheels and flap discs.

DO NOT use under wet conditions or in the

presence of flammable liquids or gases.

These heavy-duty angle grinders are professional

power tools.

of the wire wheel or brush with the guard.

Wire wheel or brush may expand in diameter

due to work and centrifugal forces.

Additional Safety Rules for Grinders

• Threaded mounting of accessories must match

the grinder spindle thread. For accessories

mounted by flanges, the arbor hole of the

accessory must fit the locating diameter of

the flange. Accessories that do not match the

mounting hardware of the power tool will run

out of balance, vibrate excessively and may

cause loss of control.

• The grinding surface of the centre depressed

wheels must be mounted below the plane of

the guard lip. An improperly mounted wheel

that projects through the plane of the guard lip

cannot be adequately protected.

• Do not use Type 11 (flaring cup) wheels on

this tool. Using inappropriate accessories can

result in injury.

• Always use side handle. Tighten the handle

securely. The side handle should always be

used to maintain control of the tool at all times.

WARNING: We recommend the use of

a residual current device with a residual

current rating of 30mA or less.

Residual Risks

In spite of the application of the relevant safety

regulations and the implementation of safety

devices, certain residual risks cannot be avoided.

These are:

– Impairment of hearing.

– Risk of personal injury due to flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

– Risk of dust from hazardous substances.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWE4120 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info