Bedienungsanleitung DeWalt DWV902L T 1 (Seite 34 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

549677

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

ENGLISH

NOTE: If using an adapter ensure it is firmly

attached to the tool outlet before following the

steps below.

a. Ensure the collar on the AirLock connector

is in the unlock position. Align notches (v) on

collar and AirLock connector as shown for

unlock and lock positions.

b. Push the AirLock connector onto the adapter

connector point.

c. Rotate the collar to the locked position.

NOTE: The ball bearings inside collar lock

into slot and secure the connection.The

power tool is now securely connected to the

dust extractor.

AUTOMATIC FILTER CLEANING SYSTEM

This vacuum has a highly effective filter cleaning

system which minimizes filter clogging. Every

30seconds, one of the two filters gets automatically

cleaned. The cleaning process alternates between

the filters and continues through the life of the unit.

NOTE: It is normal to hear a clicking sound during

this process.

NOTE: After many hours of operation the automatic

filter cleaning system may not be effective. When

this happens the filters will need to be cleaned or

replaced. Refer to Filter under Maintenance.

PARKING BRAKE (FIG. 1, 6)

The parking brake will lock one wheel in place to

prevent vacuum from rolling.

1. To engage parking brake, depress

the brake button (x) to snap the brake into the

locked position.

2. To disengage parking brake, depress the brake

button and brake will snap into the unlocked

position.

REMOVE / CHANGE USED DUST COLLECTION BAG (FIG. 1)

WARNING: Appropriate personal

protective equipment like dust mask and

gloves should be used while handling

used dust bags.

1. Turn off vacuum and unplug cord from outlet.

2. Close the twist-lock hose inlet (j) with the inlet

plug (s).

3. Unlatch canister latches (d) and remove vacuum

head (c)

4. Pull the collection bag carefully from inlet (j).

5. Seal the collection bag opening tightly when

removing it from the machine.

6. Dispose of collection bag in appropriate

container according to statutory provisions.

WET PICK UP APPLICATIONS (FIG. 1, 7)

WARNING: DO NOT connect power

tools to outlet (m) when using the

vacuum for wet pick up.

WARNING: Plug vacuum into residual

current device (RCD) protected outlet

when using the vacuum for wet pick up.

WARNING: If foam or liquid escapes

from the machine, switch off

immediately.

CAUTION: Clean the water level limiting

device regularly and examine it for signs

of damage.

NOTICE: DO NOT remove ball float

(y), doing so will cause damage to the

vacuum. The ball float keeps water from

entering the motor.

Before using the vacuum for wet pick up:

• Ensure the canister is empty and free of

excessive dust.

• Remove filters (i).

• Plug vacuum into a RCD protected outlet.

WARNING: Do not use the machine

with this set up for dust Class L and M.

TO EMPTY CANISTER (FIG. 1, 7)

The ball float valve (y) will block air to the motor

when the canister is full and the sound of the motor

will change at once. When the motor has a high

pitched sound and air/water flow stops, empty the

canister.

1. Turn off vacuum and unplug cord from outlet.

2. Unlatch canister latches (d) and remove vacuum

head (c).

3. Empty contents of canister (f) into a suitable

container or drain.

TO CONVERT BACK TO DRY VACUUM OPERATION (FIG. 1)

1. Empty Canister, refer to To Empty Canister

instructions.

2. Place canister upside down position until dry.

DO NOT use wet canister for dry pick up.

3. Place vacuum head (c) on a level surface until

dry.

4. Reinstall filters when vacuum head is dry. See

Filters under Maintenance.

5. When canister is dry place the vacuum head (c)

onto the canister and secure it by closing the

canister latches (d).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWV902L T 1 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DWV902L T 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info