Bedienungsanleitung DeWalt DWV902L T 1 (Seite 35 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

549677

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

ENGLISH

TELESCOPING HANDLE (FIG. 1, 8)

Press release button (q) to raise and lower the

telescoping handle (r).

Shut Down/Transportation

(ﬁ g. 1, 11)

1. Turn on/off/tool control switch (o) to the OFF

position.

2. Unplug the unit.

3. Class M only: Close the twist-lock hose inlet (j)

with the inlet plug (s).

4. Store the power cord (b) as shown.

5. When transporting in vehicles, secure the

machine.

MAINTENANCE

Your DEWALT appliance has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper appliance care and regular

cleaning.

WARNING: To reduce the risk

of injury, turn appliance off and

disconnect appliance from power

source before installing and

removing accessories, before

adjusting or changing set-ups or

when making repairs. An accidental

start-up can cause injury.

WARNING: For user servicing, the

machine must be dismantled, cleaned

and serviced, as far as is reasonably

practicable, without causing risk to the

maintenance staff and others. Suitable

precautions include, decontamination

before dismantling, provision for local

filtered exhaust ventilation where the

machine is dismantled, cleaning of the

maintenance area and suitable personal

protection.

• The manufacturer, or an instructed

person, shall perform a technical

inspection at least annually, consisting

of, for example, inspection of filters for

damage, air tightness of the machine

and proper function of the control

mechanism.

• When carrying out service or repair

operations, all contaminated items

which cannot be satisfactorily cleaned,

are to be disposed of; such items

shall be disposed of in impervious

bags in accordance with any current

regulation for the disposal of such

waste.

• For Class M machines the

outside of the machine should be

decontaminated by vacuum cleaning

methods and wiped clean or treated

with sealant before being taken

out of a hazardous area. All the

machine parts shall be regarded as

contaminated when removed from the

hazardous area and appropriate action

taken to prevent dust dispersal.

• For dust extractors it is necessary to

provide for an adequate air change

rate L in the room if the exhaust air is

returned to the room.

(NOTE: Reference to National

Regulations is necessary.)

Filter (ﬁ g. 1, 9, 10)

FILTER CARE

The filters included with this vacuum are long life

filters. To be effective in minimizing dust recirculation,

the filters MUST be installed correctly and in good

condition.

WARNING: Appropriate personal

protective equipment like dust mask

and gloves should be used while

handling the filters.

To Remove Filters

1. Turn on/off/tool control switch (o) to the OFF

position (O) and unplug cord from outlet.

2. Release canister latches (d) and remove

vacuum head (c) from canister. Place vacuum

head on a level surface upside down.

3. Turn each filter (i) counterclockwise by gripping

it on the plastic end cover as shown, and

carefully remove from head, ensuring debris

does not fall into mounting hole.

NOTE: Use care to not damage filter material.

4 If the bottom side of the vacuum head (c) needs

to be cleaned, use a cloth dampened with

water and mild soap and allow it to dry. Dispose

of cloth in an appropriate container.

5. Inspect filters for wear, tears or other damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DeWalt DWV902L T 1 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DeWalt DWV902L T 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info