Bedienungsanleitung Dimplex CAS 500R (Seite 15 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

706336

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

AFTER SALES SERVICE

Your product is guaranteed for two years from the date of purchase. Within this period, we undertake to repair or

exchange this product free of charge (excluding transducer discs & subject to availability) provided it has been installed

and operated in accordance with these instructions. Your rights under this guarantee are additional to your statutory

rights, which in turn are not affected by this guarantee.

RECYCLING

For electrical products sold within the European Community - At the end of the electrical products useful life

it not be disposed of with household waste. Please recycle where facilities exist. Check with your Local

Authority or retailer for recycling advice in your country.

PATENT / PATENT APPLICATION

Products within the Optimyst range are protected by one or more of the following patents and patent applications:

Great Britain GB2460259B, GB2475794B, GB2418014, EP2029941, GB2436212, GB2402206B

United States US8413358, US8136276, US7967690, US8574086

Russia RU2434181

European EP2029941, EP2315976, EP1787063 (A1), EP2388527, EP2029941,

China CN101883953A, CN102105746A, CN101057105 (A), CN101438104

Australia AU2009248743A1, AU2007224634

Canada CA2725214, CA2579444, CA2645939

South Africa ZA2008/08702

Mexico MX2008011712

South Korea KR101364191

Japan JP5281417, JP5496291

Brazil BRP10708894

India 4122/KOLNP/2008

New Zealand NZ571900

8. Put a small amount of washing up liquid into the sump, and using a soft brush, gently clean all surfaces in the sump

and gently clean the transducer including the cone and metal discs located in the top grooved surface.

9. When cleaned, thoroughly rinse the sump with clean water to remove all traces of washing up liquid.

10. Clean the nozzle with a soft brush and ush out thoroughly with water.

11. Reverse the above steps 1 – 6 to reassemble.

Transducer

The transducer is a consumable item and may need to be replaced through time, depending on its usage. Replacement

transducers can be purchased from our your dealer. The transducer is xed in the sump with a plastic clip. If you need

to replace your transducer:

1. Follow the steps 1-5 in the CLEANING - Sump section under ‘Maintenance’ to gain access to the transducer.

2. Press the clip back and lift the transducer upwards out of its holder.

3. Place the new transducer into the sump, ensuring the its cable does not sit over the cone.

4. Reverse the above steps to reassemble the nozzle and sump.

Air Filter

1. Gently lift out the fuel bed and place it aside.

2. Gently slide the air lter upwards out of its plastic holder. (Fig 27)

3. Gently rinse with water in the sink and dry with fabric towel.

4. Replace the lter making sure that the coarse black lter is facing outwards.

5. Replace the fuel bed.

Additional Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex CAS 500R Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info