Bedienungsanleitung Dimplex Edel 200 AIR D-2 (Seite 13 von 24) (Englisch)

798061

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

5.9 - Installer menu

It may be necessary to adjust certain temperature settings to

optimise the performance of the heat pump water heater,

depending on how the appliance is installed.

Accessing the installer menu:

• Press

• Turn the dial until the screen displays

«installer menu.»

• Press the «Clock settings» and

«Menu» buttons simultaneously

• Keep both buttons pressed down for 3 sec. until the

screen displays «pv mode»

To adjust the installation settings

settings

To activate photovoltaic operation

MODE PV

To go back to default settings

reset par.

To display temperatures of sensors

and inlets

display

To set the meters running, count

start-ups, etc.

counters

5.9.1 - PV mode

1. If the PV mode regulator is connected to connectors

1 and 2 on the electronics board, PV mode must be

activated.

• The electrical energy which is produced is stored in

the form of hot water. The PV function can be set to

two dierent levels of production.

• PV ECO = the lower level of the photovoltaic energy

production. The heat pump generates a higher

water temperature. The hot water temperature

must be somewhere between the regular hot water

temperature and 60°C (factory setting = 60°C).

• PV MAX = the higher level of photovoltaic electricity

production. The heat pump and electrical back-up generate a

higher water temperature. The hot water temperature must be

somewhere between the eco mode hot water temperature and

65°C (factory setting = 65°C).

2. Turn the dial to set the mode:

- Menu → INST. MENU → PV mode.

3. Select « Yes »

4. Press the dial to conrm.

5. Press Menu.

6. Set the domestic hot water temperature.

7. Turn the dial to select the primary function:

- Menu → INST. MENU → MODE PV → PRIORITY

• Yes: the signals from connectors 1 and 2 take precedence over

eco and frost protection modes.

• No: The eco and frost protection modes take precedence over

the signals from connectors 1 and 2.

N.B.: If PV mode is chosen as the primary function, the domestic

hot water will also be heated during non-selected time periods, e.g.

in holiday mode and outside of the programmed time slots.

If you only wish the domestic hot water to be heated during

authorised time slots, adjust the settings to No.

8. Press the dial to conrm your choice.

• For products which are equipped with an extra thermal heat

exchanger, no boiler request is sent when the heat pump is switched

on. Only the electrical back-up is on, to use the energy produced by

the PV function.

•When fan mode is activated, option 3 may no longer be chosen.

•The load shedding function is not available.

5.9.2 - Adjusting the operating settings

Select setting Modify the

setting

settings

Enter

• Press to return to the main menu.

5.9.2.1 - ANTI-BACT -anti-legionellosis cycle

Example :

anti-bact = 8,

temp. water = 60 C

the anti-legionellosis cycle

will run every 8 days at 10pm

Select number of days

ANTI-BACT

8 d

Factory setting anti bact = NO

Factory setting temp. water = 60 C

TEMP. water

60 C

Select the temperature

Conrm

• If the set temperature for domestic hot water is already 60°C

(see § «Setting the desired water temperature»), there will be no

anti-legionellosis cycle as it is already running continuously.

• Press to return to the main menu.

Parameter Description Unit Time

range Factory

setting

mode pv Activation of

photovoltaic mode yes

priority Interval of anti-

legionellosis cycles yes

yes

Parameter Description Unit Time

range Factory

setting

anti-

bact

Time interval

for anti-

legionellosis

cycle

days 0-99 0

fan

mode

Ventilation

mode  1,2,3 1

toC mini Min. temp for

electrical back-

 0 or 1 0

shedding Load shedding

level  0,1,2 1

max.

time

Max. heating

time hours No,

auto, 1

to 24

- INSTALLER HEAT PUMP WATER HEATER 200 -270L AIR D/2 - MANUAL - 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dimplex Edel 200 AIR D-2 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dimplex Edel 200 AIR D-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info