Bedienungsanleitung Dirt Devil M3230 (Seite 14 von 24) (Deutsch, Englisch, Französisch)

500147

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

5 Maintenance

5.1 Emptying the dust container

 It is best to empty the dust container after each vacuuming session.

 Empty the dust container at the latest when the “MAX” mark (Fig. 9/B1)

has been reached, if storing it for a long period, or when sending it.

1. Switch off the appliance, ZChapter 4.3, "Switching off".

2. Press the release button for the dust container (Fig. 9/A1) and remove

the dust container from its console.

3. Empty the dust container by holding it low over a dustbin and only then

press the release button (Fig. 9/B).

4. If the dust container and cyclone unit are still dirty after being emptied,

proceed as described in ZChapter 5.2, "Cleaning the dust container

and cyclone unit".

5. Otherwise put the bottom on and put the dust container back into its

receptacle. Check that it is securely fitted.

5.2 Cleaning the dust container and cyclone unit

1. Unlock the cyclone unit by turning it in the opposite direction to the dust

container (Fig. 10/A). The arrow on the dust container moves in the

“UNLOCK” direction.

2. Take the cyclone unit up out of the dust container (Fig. 10/B).

3. If necessary, separate the lower part of the cyclone unit from the upper

part by turning the two in opposite directions (Fig. 10/C).

4. Remove any residual dust still clinging to the dust container and

cyclone unit using a dry cloth or a soft brush, e.g. the supplied furniture

brush.

5. If you dismantled the two parts of the cyclone unit, put them back

together. Connect both parts together by turning them towards one

another.

6. Place the cyclone unit on the dust container again. Make sure that the

arrow on the dust container and the fitting mark of the cyclone unit are

opposite one another. Connect both parts by turning them towards one

another. The arrow on the dust container moves in the “LOCK”

direction.

5.3 Cleaning the dual motor protection filter

 It is best to check/clean the dual motor protection filter each time you

clean the dust container and cyclone unit, ZChapter 5.2, "Cleaning the

dust container and cyclone unit".

 Clean the dual motor protection filter at the latest when the cleaning

indicator (Fig. 11/A1) lights up.

1. Release the retaining clip on the cover as shown (Fig. 11/B) and open

the cover.

2. Remove the dual motor protection filter (Fig. 11/C).

3. Hold the dual motor protection filter low over a dustbin. Separate the

filter elements from one another (Fig. 12/A). Remove larger

agglomerations of dirt by hand.

4. If the filter elements are still dirty, thoroughly rinse them by hand until

all dirt is gone.

5. If one of the filter elements is damaged, replace it with a new one

(ZChapter 5.5, "Spare parts and accessories").

6. Put the completely dry filter elements back together again.

7. Put the dual motor protection filter back onto the cyclone unit (Fig. 12/

B).

8. Put the cover back on. Lock the cover by pushing it firmly onto the

cyclone unit (Fig. 12/C) until the retaining clip clicks into place.

ATTENTION:

Switch off the appliance before emptying the dust container. This will

prevent dust from damaging the appliance.

MAX

NOTE:

You can dispose of the contents of the dust container with your regular

domestic waste as long as it does not contain any substances not

permitted in domestic waste.

NOTE:

If the dust container can no longer be completely cleaned by simply

opening the bottom, the cyclone unit has to be removed.

ABC

ATTENTION:

The filter elements are washable, but may not be cleaned in

dishwashers or washing-machines. Also, do not use detergents or

brushes with hard bristles to clean the filters. Let the filters dry for approx

24 hours at room temperature after cleaning. Only put them back into

the appliance when they are completely dry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dirt Devil M3230 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dirt Devil M3230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info