Bedienungsanleitung DITEC Traffic CM (Seite 26 von 44) (Englisch, Holländisch)

499507

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

- 26 -

0DT829 15/10/2012

1. GENERAL SAFETY PRECAUTIONS

This installation manual is intended for professionally competent personnel only.

The installation, the electrical connections and the settings must be completed in conformity with good workmanship

and with the laws in force.

Read the instructions carefully before beginning to install the product. Incorrect installation may be a source of danger.

Packaging materials (plastics, polystyrene, etc) must not be allowed to litter the environment and must be kept out of the

reach of children for whom they may be a source of danger.

Before beginning the installation check that the product is in perfect condition.

Do not install the product in explosive areas and atmospheres: the presence of ammable gas or fumes represents a serious

threat to safety.

Before installing the door, make all the structural modications necessary in order to create safety clerance and to guard

or isolate all the compression, shearing, trapping and general danger areas.

Check that the existing structure has the necessary strength and stability.

The safety devices must protect against compression, shearing, trapping and general danger areas of the motorized door.

Display the signs required by law to identify danger areas.

Each installation must bear a visible indication of the data identifying the motorised door.

Before connecting to the mains check that the rating is correct for the destination power requirements.

A multipolar isolation switch with minimum contact gaps of 3 mm must be included in the mains supply.

Check that upstream of the electrical installation there is an adequate differential switch and a suitable circuit breaker.

Ensure that the motorised door has an earth terminal in acwireance with the safety adjustements in force.

The manufacturer of the door declines all responsability in cases where components which are incompatible with the safe

and correct operation of the product only original spare parts must be used.

For repairs or replacements of products only Ditec Entrematic original spare parts must be used.

The tter must supply all information corcerning the automatic, the manual and emergency operation of the motorised door

or gate, and must provide the user the device with the operating instructions.

All data and specications have been drawn up and checked with the greatest care. The manufacturer cannot however take

any responsibility for eventual errors, ommisions or incomplete data due to technical or illustrative purposes.

Optional accessory

Safety Confort

Safety Top

CONTENTS

Chap. Topic ..................................................................................................................................... Page

1. GENERAL SAFETY PRECAUTIONS ....................................................................................... 26

2. TECHNICAL CHARACTERISTICS ........................................................................................... 27

3. MECHANICAL INSTALLATION

3.1 Initial checks ......................................................................................................................... 28

3.2 Fixing the uprights ................................................................................................................. 28

3.3 Assembling the crosspiece .................................................................................................. 28

3.4 Placing the crosspiece in position ......................................................................................... 28

3.5 Assembling the curtain .......................................................................................................... 28

3.6 Assembling the counterweights ........................................................................................... 28

3.7 Assembling the emergency release lever ............................................................................ 28

3.8 Installing the photocells ......................................................................................................... 28

3.9 Installing the safety edge ..................................................................................................... 28

4. ELECTRIC CONNECTIONS

4.1 Control panel ......................................................................................................................... 29

4.2 Connecting the control panel / automation ........................................................................... 29

4.3 Safety photocells ................................................................................................................... 29

5. ELECTRONIC CONTROL PANEL

5.1 49E - connections ................................................................................................................. 30

5.2 47E (inverter) - connections .................................................................................................. 34

6. ADJUSTING AND STARTING

6.1 Check of the movement direction ......................................................................................... 38

6.2 Cable safety edge adjustments ............................................................................................. 38

7. TROUBLESHOOTING .............................................................................................................. 39

8. MAINTENANCE ........................................................................................................................ 40

DITEC Traffic CM Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info