Bedienungsanleitung DJI Inspire 1 RAW (Seite 81 von 85) (Englisch)

653252

Zoom out

Zoom in

Vorherige Seite

1/85

Nächste Seite

User Manual

INSPIRE RAW

Intelligent Flight

Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and

Waypoints features to assist users to create professional shoots during the ight. Course Lock and Home

Point lock helps to lock the orientation of aircraft so that the user can focus more on other operations.

Point of Interest, Follow Me and Waypoints mode enable aircraft to y automatically according to the pre-

set ight maneuvers.

Course Lock

Lock the current nose direction as the aircraft’s forward direction. The aircraft

will move in the locked directions regardless of its orientation (yaw angle).

Home Lock

Pull the pitch stick backward to move the aircraft toward its recorded Home

Point.

Point of Interest

The aircraft will orbit around the subject automatically to allow the operator

can be more focus on framing their shoot on the subject in Point of Interest.

Waypoints

Record a ight path, then the aircraft will y along the same path repeatedly

while you control the camera and orientation. The ight path can be saved

and re-apply in the future.

Enable Multiple Flight Mode by launching the DJI GO app > Camera View >

> Advanced Settings >

Multiple Flight Mode before using the Intelligent Flight Mode for the rst time.

How to Update Firmware

Follow the process described below to upgrade the aircraft, remote controller and battery.

Updating the Aircraft Firmware

Step 1- Check Battery and SD Card Capacity

Ensure the Intelligent Flight Battery has at least 50% power and there is at least 100 MB of free space on

the SD card.

Step 2- Prepare the Firmware Update Package

1. Download the firmware update package from the official DJI website (http://www.dji.com/product/

inspire-1-pro-and-raw).

2. Insert the SD card into your PC. Extract the all downloaded les into the root directory of the SD card.

Remove the SD card from your PC. Ensure the aircraft is powered off then insert the SD card into the

SD card slot on the camera.

Step 3- Update the Aircraft

1. Ensure the remote controller is powered off and then power on the aircraft. Upgrade will begin

automatically after aircraft is powered on.

2. It will take approximately 25 minutes to complete the rmware update. The camera status indicator

will blink green and red to indicate the upgrade is in progress and stop blinking when the update is

complete with success.

3. Check the upgrade status by opening the “.txt” le that is automatically generated after the update.

The update is successful if the text “result: successful” is in the document. Try upgrading the rmware

again if the text “result: failed” is found or the camera status indicator shows solid red.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DJI Inspire 1 RAW Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info