Bedienungsanleitung Dolmar PM-5120 S (Seite 9 von 24) (Englisch, Holländisch)

507686

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

4. TECHNICAL DATA

5. ASSEMBLY

5-1 ASSEMBLY THE FOLDING HANDLE

1. Fix the lower handlebars into the unit body with

locking knobs as shown. (Fig. 2A, Fig. 2B, Fig. 2C,

Fig. 2D)

2. Connect the upper handle and the lower handle with

the locking knob. (Fig. 2E, Fig. 2F, Fig. 2G)

3. Attach the cable-clamp to the position shown and then

attach the cable. (Fig. 2H)

6. ADJUSTMENT OF CUTTING

HEIGHT

Apply outward pressure to disengage lever from rack.

Move lever forward or back to adjust height.

The height (the blade to the ground) can be adjusted from

25 mm (1 position: the lowest position) to 70 mm

(5 position: the highest position), 5 height positions.

(Fig. 3A, Fig. 3B).

Stop mower and disconnect spark plug cable before

changing mower cutting height.

WARNING: Make this adjustment only when the

blade is stopped.

7. ADJUSTMENT FOR AN

APPROPRIATE HEIGHT

(Fig. 4A, Fig. 4B)

1. Back out the locking knobs which fixed the lower

handle, refer to Fig. 4A.

2. Refer to Fig. 4B move the lower handle up and down,

adjust it to the proper height.

There are 3 adjusting heights to be chosen on this

type of lawn mower; at position 1 height is highest., at

position 3 height is the lowest.

3. Adjusting to the proper height, then fix the lower

handle by the locking knobs.

WARNING: The left side and right side of lower

handle must adjust to the same height.

8. STARTER HANDLE (Fig. 5)

Move the starter handle from the engine to the rope guide.

9. “2 IN 1”

9-1 RESETTING FOR SIDE DISCHARGE

MOWING

1. Lift sideward flap for side discharge. (Fig. 6A)

2. Mount the discharge guide for side discharge on the

support pin of the sideward flap. (Fig. 6A, Fig. 6B)

3. Lower the sideward flap- the flap lies on the discharge

channel. (Fig. 6C)

Only when motor and cutter are at standstill!

9-2 MULCHING MOWER

What is mulching?

When mulching, the grass is cut in one working step, then

finely chopped and returned to the grass strip as natural

fertilizer.

Hints for mulch-mowing:

- Regular cut-back by max. 2 cm form 6 cm to 4 cm

grass height.

- Use a sharp cutting knife

- Do not mow wet grass

- Set max. motor speed

- Only move at working pace

- Regularly clean mulching wedge, housing inner side

and mowing blade

WARNING: Only with a stopped motor and

standstill cutter.

1. Raise the sideward flap and remove the discharge

channel. (Fig. 7A, Fig. 7B)

Model PM-5120 S PM-5120

Engine type B&S675EX Series, ReadyStart, 126T B&S625E Series, 122T

Self-Propelled Yes No

Engine Displacement 190 cm

190 cm

Blade Width 510 mm 510 mm

Rated Speed 2,800/min 2,800/min

Fuel Tank Capacity 1.0 L 1.0 L

Net Weight 31.7 kg 28 kg

Height adjustment: 25-70 mm, 5 adjustment

(SPL) at the site of the user

(k = 3 dB (A))

79.2 dB (A) 78.9 dB (A)

Guaranteed Sound Power level L

98 dB (A) 98 dB (A)

Vibration (k = 1.5 m/s

)

2.305 m/s

2.056 m/s

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dolmar PM-5120 S Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info