Bedienungsanleitung Domo DO343DH (Seite 36 von 52) (Deutsch, Englisch, Holländisch, Französisch)

738926

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

DO343DH

USE

· Let the machine run for 24 hours when you use it for the rst time.

· The machine is designed to work in an environment with a temperature between 5°C and 35°C.

· If the machine is turned o and turned on again quickly, give the machine approximately 3 minutes to

restart correctly.

· Do not connect the dehumidier to a shared outlet which is used for other devices.

· Choose a suitable location with an easily accessible outlet.

· Connect the machine to an earthed outlet, where the voltage is consistent with the voltage listed on

the machine.

· Make sure that the water reservoir is in the correct position, otherwise it will not work properly.

CONTROL PANEL

20180315

(RoHS)

PC 0.25(



MODEL



MATERIAL





PART



REL



REV NO



WEIGHT



SCALE



AUTHORIZE



APPROVE



STANDARD



PROESS



CO.BY



DESIGN

   

1:1

S K



Guangdong Midea Air-conditioning Equipment Co.,Ltd

PART NO.

TOTAL SHEETS

NO OF SHEETS



1 1







MARKER

NUMBER

ECN NO

SIGNATURE

DATE

EU-CFZ0.6BD/N3-DF(A3)

EU-CFZ0.6BD/N3-DF(A3).PM-4(YS)ZDS

16020100000057

E 2017-03

1 QMK-J036.1013(QMK-J53.028) PVC PC

2 QMK-J036.1013(QMK-J53.028) PVC PC

6 ( ) 3M9448HK ()

7 SJ/T10628 6

8 RoHS QMK-J000.1002

9 REACH QMK-J000.1008 REACH

technical requirement(Ver.: E, 2017-03)

1. Material performance shall comply with QMK-J036.1013 QMK-J53.028) PVC PC General Technical Conditions for Labeling Parts

2. Adhesiveness of finished pieces shall comply withQMK-J036.1013(QMK-J53.028) PVC PC General Technical Conditions for Labeling Parts;

3. Finished pieces shall be level, kept in even thickness and clear side cut without any defect;

4. Surface of finished pieces shall be free from dent, scratch, vaporific effect, black spot, white spot and other impurities;

5. Color of finished pieces is ( ) and font color is . These colors shall be inspected according to sealed sample.

6. The front of finished pieces shall be (gross)finish, and the back of finished pieces shall

be coated with self-adhesive. The glue trademark is (3M9448HK ) and the undimensioned glue is (). The coverage of self-adhesive coating shall comply

with the drawing requirement, be kept in even thickness and be attached firmly with light pressure.

7. Undimensioned dimensional tolerance shall comply with Level (6), SJ/T10628 Plastics Dimensional Tolerance;

8. Materials subject to RoHS shall comply with QMK-J000.1002 Technical Standard for Restricted Hazardous Substance in the Products of MIDEA.

9. Materials subject to REACH shall comply with QMK-J000.1008 Technical Standard for REACH of MIDEA.

543

1. On/O Button

TURBO

Press this button to turn the dehumidier on and o. When you turn the machine on, the ‘power’ light will

turn on and the display will show the air humidity percentage at the moment.

2. Mode

TURBO

This button allows you to choose from 4 settings:

Dehumidify

The air humidity can be set from 35% relative humidity to 85% relative humidity at 5% intervals. For dryer

air, press “-” and set the air humidity to a lower percentage. (min. = 35)

For moister air, press “+” and set the air humidity to a higher percentage. (max. = 85)

The ideal humidity in the house falls approximately between 40% and 60%.

There will be no indicator light with this setting.

Dryer function

With this setting, the dehumidier operate at maximum capacity. The ventilation speed is high. Select

this setting to dry moist clothes more quickly. Position the dehumidier with the air exhaust aimed at the

clothes. Leave approximately 30 to 50 cm between the appliance and the clothes.

Caution: do not cover the openings of the appliance. A lack of air circulation can cause overheating and

re. Make sure that no water gets into the appliance; this may cause electrical shocks.

The “Dryer” indicator light will light up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Domo DO343DH Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info