Bedienungsanleitung Domo DO343DH (Seite 37 von 52) (Deutsch, Englisch, Holländisch, Französisch)

738926

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

DO343DH

www.domo-elektro.be

Continuous dehumidifying

Press this button to let the dehumidier run continuously for a maximum dehumidication until the water

reservoir is full. The buttons to set the air humidity cannot be used when the device is set to «continual».

Press this button again to cancel continual operation. You can also go back and use the buttons to set the

humidity.

The “Cont.” indicator light will light up.

Smart dehumidifying

With this function the dehumidier will check the humidity automatically and ensure a pleasant climate.

The level of humidity will be regulated between 45% and 55%. The level of humidity that was set with the

dehumidifying programme no longer applies.

The “SMD” (Smart Dehumidifying Mode) indicator light will light up.

3. Timer

TURBO

You can set the timer for a maximum of 24 hours. Pressing the “+” and “-” buttons will increase or

decrease the time by half an hour. With a setting of more than 10 hours, the time will increase or decrease

by an hour.

Timer for switching on automatically

Press the timer button while the appliance is o. The “On” indicator light above the timer button will light

up. The display will show the time set. This can be increased or decreased with the “+” and “-” buttons.

Once the set time has passed, the appliance will switch on automatically.

If so desired, you can now set the timer to switch it o automatically. Press the timer button another time

while the appliance is o. The “O” indicator light will light up. Set the time with the “+” and “-” buttons.

Once the set time has passed, the appliance will switch o automatically. Note: this time must be longer

than the time set for switching on.

Timer for switching o automatically

Press the timer button while the appliance is on. The “O” indicator light above the timer button will light

up. The display will show the time set. This can be increased or decreased with the “+” and “-” buttons.

Once the set time has passed, the appliance will switch o automatically.

If so desired, you can also set the timer to switch it on automatically. Press the timer button another time

while the appliance is on. The “On” indicator light will light up. Set the time with the “+” and “-” buttons.

Once the set time has passed, the appliance will switch on automatically. Note: this time must be longer

than the time set for switching o.

4. Fan

TURBO

Select the fan speed using the fan button. The appliance will reduce the humidity more quickly with a

higher ventilation speed. The indicator light above the button will light up:

· Low: low speed

· Med: medium speed

· Low & Med: high speed

5. “+” and “-” buttons

Use these buttons to set the desired humidity percentage. This can only be done in the Dehumidify mode.

See point 2. Mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Domo DO343DH Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info