Bedienungsanleitung DreamVision Yunzi (Seite 26 von 52) (Englisch)

768206

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

7.0 PICTURE ADJUST SETTINGS

26 R699820 - Yunzi Series User Manual

• 3D Video best with HDTV programs in 3D.

• 3D Animation best with 3D animations.

• THX dedicated color preset for THX proﬁles.

• Off switches off the color proﬁles.

7.2 Color Temperature

Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer

ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the

Picture Proﬁle selected, this setting can be set to:

• Preset: from 5500K / warm colors, up to 9500K / cold colors in steps of 500K.

• Xenon1(*) uses the Xenon ﬁlter and color compensation to reproduce a ﬁlm projector

• Xenon2(*) uses the Xenon ﬁlter and color compensation to reproduce a digital cinema projector

• Xenon3(*) same as Xenon2, but within a cooler temperature.

• High Brightness used for maximum brightness output available.

• Custom1, Custom2 and Custom3 can be used to adjust color temperature to speciﬁc environment.

A Custom setting allows a ﬁne adjustment of a Color Temperature by selecting it in the Correction Value menu.

Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.

7.3 Gamma

Gamma is the relationship between the color values of the data and the color values displayed. The Gamma

coefﬁcient makes it possible to adjust the brightness of the midtones only without affecting the very bright and very

dark areas. If gamma is set too high, middle tones appear too dark. If it's set too low, middle tones appear too light.

Depending on the current active Picture mode, the Gamma setting can be set to:

• Normal: Standard setting for 2D

• Gamma A: focus on tone

• Gamma B: for ﬁlm and movie projection (S curve).

• Gamma C: for ﬁlm and movie projection with more detailed blacks than setting B.

• Gamma D: this setting is recommended for bright midtones and Computer like projection.

• Gamma E: Recommended setting for 3D movies.

• Gamma F: Brighter picture than Gamma E.

• Gamma G: Recommended setting for HDTV and sport programs.

• Gamma H: Brighter picture than Gamma G.

• Custom1

• Custom2

• Custom3

The Custom data can be set to:

• Correction Value: a unique value that will act as a gamma coefﬁcient between 1.8 and 2.6.

• Gamma Adjustment: the gamma curve can be adjusted for each color Red, Green and Blue.

• Copy: copy the adjusted values to temporal memory.

•Paste: paste values stored in memory to current proﬁle.

• Reset: reset to the default 2.2 gamma coefﬁcient.

Gamma Adjustment can be copied from all modes. Paste can only be used for Custom modes.

Additional Gamma settings for Yunzi 2 & 3:

• Film1: Eastman gamma

Accurate color temperature may require professional tools such as dedicated software and colormeter. Wait

at least 15 minutes after startup before modifying the picture settings.

(*) Xenon Modes are exclusive to Yunzi 2 & 3 models.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Yunzi Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info