Bedienungsanleitung DreamVision Yunzi (Seite 28 von 52) (Englisch)

768206

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

7.0 PICTURE ADJUST SETTINGS

28 R699820 - Yunzi Series User Manual

• RNR: Random Noise Reduction. You can set it from 0 up to 16 to reduce the picture random noise.

•MNR: Mosquito Noise Reduction function is used to reduce the Mosquito noise on the picture, generally found in

compressed digital video signals such as television broadcast or encoded movies. Adjust the MNR value from 0

up to 16 to reduce the typical broadcast picture mosquito noise

•BNR: Block Noise Reduction uses a large portion of the picture to reduce the digital noise, this ensures a higher

quality ﬁlter. Adjust the BNR value to On or Off.

Color Management (TSL adjustments)

The Color Management gives the installer an unique calibration ease with the integrated Color Adjustment menu:

each primary, secondary colors and orange can be independently calibrated to obtain a precise color balance in a

snap. Adjust the Red, Green, Blue, Yellow, Cyan, Magenta and Orange Tints, their saturations and luminances and

store them into Custom1, Custom2 or Custom3 proﬁles.

User Name Edit

You can edit the picture modes names User1 to 5 using a maximum length of 10 characters. You can use alphabet

letters, numbers and symbols:

a) Select the user name you want to edit from User1 to User5. Press [OK] to enter the edit mode.

b) The input cursor displays the place where the new character will be insert. It will move automatically as a

character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert it.

c) Press [BACK] to exit edit mode.

Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the speciﬁc character.

All Clear: To delete all characters. OK: To save the current name, a save conﬁrmation will appear.

Clear Motion Drive (120Hz)

The Clear Motion function uses a 120Hz video processing to render a smooth and clear motion for movies shot at

24Hz or HD movies at 60Hz. Set the correct level between:

• Off: Frame interpolation is disable.

•Low: light frame interpolation

• High: strong interpolation

•Inverse Telecine: dedicated interpolation for 60i and 60p sources originally shot in 24p.

Lens Aperture

The lens is equipped with a variable electronic aperture. This function is used to optically adjust the light output

depending on the viewing conditions and the light ambiance. Adjust from the correct aperture from partially closed

to fully opened.

Lamp Power

Set the lamp power used by the current Picture Proﬁle:

Low: lamp is set to 180W

High: lamp is set to 230W.

To avoid any damage to the lamp, you can’t change the lamp power within 90 seconds from the projector startup or

60 seconds after lamp power change.

7.11 Reset Picture Proﬁle

Prompt a conﬁrmation to reset the current Picture Proﬁle to default settings.

User Name Edit

BACK

Name User 1

Clear All Clear OK

Exit

Select

Operate

Picture Adjust

SPACE

Select cursor Input cursor

Character list

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Yunzi Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info