768206
29
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
8.0 INPUT SIGNAL SETTINGS
R699820 - Yunzi Series User Manual 29
8.0 INPUT SIGNAL SETTINGS
8.1 HDMI Inputs
This menu is available if the selected active input is HDMI1 or HDMI2.
Input
•Auto: The input dynamic range is automatically detected and configured.
Standard: Force dynamic range to 16-235.
Enhance: Force dynamic range to 0-255.
Super White: Force dynamic range to 16-255.
Check Input Levels
The following pattern is overlaid to current picture to confirm that the correct input level has been selected.
Use the Input Levels pattern to confirm the correct HDMI dynamic range setting.
Color Space
•Auto: The source color space is automatically detected and configured.
YCbCr(4:4:4): Set color space to YCbCr 4:4:4.
YCbCr(4:2:2): Set color space to YCbCr 4:2:2.
RGB: Set color space to RGB 4:4:4.
Control with HDMI (CEC*)
Off: By default the CEC(*) communications are disabled.
On: Enables CEC(*) communications to be sent to the projector through HDMI cable.
(*) CEC stands for Consumer Electronic Control
8.2 Component
This menu is available if the selected active input is Component.
•Y Pb/Cb Pr/Cr: Select this option if the COMP. input is connected to a component video signal.
RGB: Select this option if the COMP. input is used with a RGB video source.
8.3 PC (Yunzi 2 & 3 only)
This menu is available if the selected active input is PC (Sub-D15) input.
•Auto Alignment: Automatically adjusts Tracking, Phase and Picture Position
•Tracking: Adjust the horizontal size and display area of the picture.
Phase: Adjust flickering and blurred pictures.
Picture Position: Adjust the display position of the picture.
8.4 Picture Position
Depending on your source, you may find that the picture should be adjusted into the screen, adjust the horizontal
and vertical position of the picture into the screen. Some signals may not be fully displayed, adjust this setting
properly when necessary.
8.5 Aspect Ratio
When watching a movie or video program, you can manually set the desired aspect ratio to fill your screen. Select
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision Yunzi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info