Bedienungsanleitung Drift HD (Seite 8 von 17) (Englisch)

595086

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

15 16

using the camera

A CHANGING THE RECORD MODE

In order to switch between recording video and shooting photos, you will need to

change the camera Record Mode in the Video Conﬁguration Menu.

1. Press the MENU button to open the Main Menu.

2. Use the UP and DOWN buttons to highlight the Video Conguration icon, and press

the SELECT button.

3. The screen will show a list of settings. Highlight the Record Mode option and press

the SELECT button.

4. Highlight the icon of the Record Mode you wish to use and press the SELECT button

again.

5. Press the MENU button twice to return to Live Preview.

Note: The camera must be in Live Preview to record any video or take any photos. The

MENU button also functions as a BACK button. Press the MENU button a few times to

return to Live Preview.

B VIDEO MODE

When the camera is in Video Mode, the screen will display a live preview image from

the camera lens and a number of icons indicating the camera’s status.

Recording Video

1. Ensure that the camera has been set to Video Mode using the Video Conguration

menu.

2. To start recording, press the SELECT button on the camera or the RECORD button

on the remote control. The unit will beep and the LED will turn red.

3. To stop recording, press the SELECT button again, or the STOP button on the

remote. There will be another beep and the LED will return to green.

Note: If the SD card runs out of space while recording, the camera will stop recording

but it will remain switched on. You will need to turn it o yourself unless Camera

Auto-O has been enabled (page 19).

Note: If the video being recorded is very long, the video le will be separated into

multiple les every 3.6 GB (i.e. every 40 minutes in 1080p). This is automatic – you do

not need to monitor this process. The camera will resume lming after a few seconds,

once the ﬁle is saved. Please be patient while the ﬁle is saving.

B) PHOTO MODE

When the camera is in Photo Mode, the screen will also display a live preview image,

but the camera status icons are slightly dierent.

Taking Photos

1. Ensure that the camera has been set to Photo Mode using the Video Conguration

menu.

Record Mode

Video Configuration

1/2

Resolution: 1080P

Frame Rate: 30

Exposure: 0.0

Outdoor / Indoor

Video Configuration

1/2

Resolution: 1080P

Frame Rate: 30

Exposure: 0.0

Outdoor / Indoor

00.00.02

Mode Indicator

Recording Indicator

Remaining Memory

Remaining Battery

2. Press the SELECT button on the camera or the RECORD button on the remote

control. The unit will beep once and the LED will briey turn red.

3. Once the LED returns to green, the camera is ready to take another photo.

D TIMELAPSE MODE

Taking Time-Lapse Photos

The Drift HD includes a Time-Lapse Mode. When activated, the camera will take a

photo every few seconds until it is stopped or the memory card is full.

1. Ensure that the camera has been set to Time-Lapse Mode using the Video

Conﬁguration menu.

2. Press the SELECT button on the camera or the RECORD button on the remote

control. The unit will beep once and the LED will briey turn red.

3. The camera will take photos every 2 seconds by default.

4. To cease recording, press the SELECT button on the camera or the STOP button on

the remote control. The camera will beep and the LED will return to green.

Note: You can change the time interval between time-lapse photos by modifying the

Sequence Interval setting as described below.

Changing the Sequence Interval

1. Press the MENU button to open the Main Menu.

2. Use the UP and DOWN buttons to highlight the Video Conguration icon, and press

the SELECT button.

3. The screen will show a list of settings. Highlight the Sequence Interval option and

press the SELECT button.

4. Use the UP and DOWN arrows to choose the desired time interval and press the

SELECT button to conrm.

Note: The Sequence Interval setting can only be changed when the record mode is

set to Time-Lapse. The available Sequence Interval settings are 2, 3, 5, 10, 30 seconds

and 1 minute.

E ZOOM

The Drift HD includes a digital zoom function that allows you to take close-up photos

and videos. To use it, press and hold the UP arrow to zoom in, and the DOWN arrow

to zoom out.

Note: You can zoom in and out while video recording is in progress

Note: The zoom indicator bar may disappear when it is not in use.

Note: Please be aware that using the digital zoom may aect the image quality of your

recording.

Shots RemainingRemaining Battery

Zoom Indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Drift HD Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Drift HD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info