Bedienungsanleitung Drift HD (Seite 10 von 17) (Englisch)

595086

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

19 20

conserving battery

The Drift HD comes with a rechargeable 1110mAh Lithium-Ion battery, allowing you

to record continuously for hours between charges. However, sometimes you may nd

yourself in a location without a power outlet to charge your camera with. Also, cold

conditions drain battery power at a faster rate. Fortunately, the Drift HD comes with a

number of features to extend the battery life. These can all be found in the Setup Menu.

Note: Changing camera settings is described in the Setup Menu section on page 23-24.

LCD O

The Drift HD’s built-in LCD screen consumes power, so one of the best ways to

extend your battery life is to use the LCD Auto-O function. By default this LCD

screen is always on, but it can be set to turn o when no buttons are pressed for a

while (the exact time interval is chosen when turning this function on). The camera

will still function as normal when the screen is switched o – in Live Preview, the

camera is ready to record at any time, and if recording is in progress, it will continue

to record with the screen o. The remote can also be used with the screen o. The

screen can be turned on again by pressing any button.

! Do not use the Select button to switch the camera screen back on – doing so will

begin a new recording or stop the current recording if the camera is in Live Preview.

Unless you specically want to start or stop a recording, use any of the other buttons.

Changing the Brightness Setting

The LCD backlight also consumes power. If you don’t want to switch the LCD screen

o, it is possible to reduce its intensity by using the LCD Brightness setting on the

second page of the Setup menu. You may notice a slight increase in battery life if you

use a lower brightness setting.

Camera Auto-O

It is also possible to set the camera to switch o entirely when no buttons are pressed

for a set amount of time (the exact time interval is chosen when turning this function

on). The main use of this function is to automatically switch o the camera in case

you forget to do so yourself.

Note: This will not switch the camera o while recording is in progress. However,

when the camera does switch o, you will need to switch it back on again before you

can record any new video.

Note: The remote control will not operate the camera while the camera is switched o.

Spare batteries

If the battery life of the Drift HD is not long enough for your purposes, you can charge

a second battery before you set out and then swap it when the ﬁrst runs out. Spare

1110mAh batteries and external PowerPacks are available from Drift dealers. Please

visit our ocial website www.driftinnovation.com for more information regarding

batteries and accessories.

! Always change the battery in a clean,

dry and safe environment. Getting

camera batteries wet will damage them

and may result in injury to yourself. For

your safety, never use damaged batteries.

camera care

The Drift HD is specically designed for extreme sports. It is a very durable piece of

equipment. However, to ensure a long and healthy life for your camera, please follow

the instructions below.

Cleaning the Camera

During your sporting activities, the camera will inevitably get dirty or wet. Although

this is not an issue, it is recommended that you clean the Drift HD after use. Clean

the camera thoroughly with a damp cloth and let it air dry before you open the back

hatch or rotate the lens. Take extra care when cleaning the built-in microphone or the

internal speaker.

Cleaning the Lens and LCD Screen

In order to provide a clear image for high denition video, it is important to keep the

camera lens clean. Be careful not to scratch the camera lens whilst cleaning it. Wipe

o any surface mud or water from the lens with a damp cloth and use a dry scratch-

proof cloth to polish the lens once it is dry.

Cleaning the Seals

To ensure that the camera remains weatherproof and water resistant, it may be

necessary to occasionally clean the contact surfaces around the rear camera hatch

seal. This can be done by wiping a damp cloth around the seal. Be careful not to leave

excessive water on the seal, and let it air dry.

! Scratch-proof cloths are available from

any camera shop or optician.

! You can run a little Vaseline® around

the rubber seal from time to time to keep

the seal airtight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Drift HD Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Drift HD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info