801299

Drive Ecotec 2G Seite 9

9
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
16
Instructions for use ECOTEC 2G Instructions for use ECOTEC 2G
17
Drive Medical GmbH & Co. KG | As per: 26.10.2022 | Errors and alterations excepted Drive Medical GmbH & Co. KG | As per: 26.10.2022 | Errors and alterations excepted
EN EN
For easier transport or for stowing in motor vehicles, the
wheelchair can be collapsed with just a single maneuver.
To do this, fi rst remove the optional seat cushion as well
as the footrests, then grasp both looped handles loca-
ted at the side of the seat surface cushion and pull the
wheelchair upwards (photo 22+23).
22 23
To swivel the armrest backwards, engage the release le-
ver at the front of the arm rest and hold it down it while
simultaneously pulling the armrest up until the armrest
is free. Now it can be swiveled backwards (photo 11+12).
11 12
Adjusting and using the parking brake
Upon delivery, the parking brake is correctly adjusted
according to the confi guration status. If you have made
changes to the wheel position, the brake adjustment
may need to be changed.
To do this, remove both screws on the underside of the
respective brake (photo 13) and push the complete unit
onto the guide such that there is a distance of 12 mm
between the brake bolt and the tire (photo 14). Retigh-
ten both screws and the parking brake is now optimally
adjusted.
Ensure that all screws are reinserted and tightened!
To use the parking brake, press the brake lever fi rmly
from the front until it noticeably clicks into place – the
parking brake is now engaged (photo 15).
To release, pull the brake lever towards you and the par-
king brake is unlocked (photo 16).
15 16
Always ensure that the parking brake is locked by att-
empting to move the wheelchair.
To facilitate transferring into and out of the wheelchair,
the operating lever of the parking brake can be folded
down. (photo 17+18). To do this, pull the lever upwards
and then fold it down.
17 18
Adjusting and using
the hand brake (optional)
Upon delivery, the optional hand brake is correctly adjus-
ted for the attendant. If bra-
king is insuffi cient, this can
be increased by unscrewing
the adjusting screw and de-
creased by screwing in the
adjusting screw (photo 19).
For adjustment, fi rst remo-
ve the locking nut and then
perform the corresponding
adjustment; thereafter retighten the locking nut and in
doing so, use pliers to hold the adjusting screw. To bra-
ke the wheelchair by the attendant, pull up both brake
handles at the hand grip.
To apply the brakes (such as for parking), you can lock the
brake handle in the braking position by simply pushing
the locking mechanism forwards with your fi nger until it
snaps into place; to unlock, push the locking mechanism
back (photo 20+21).
20 21
If you need to step away from the wheelchair while it is
occupied, it is essential to additionally apply the parking
brake.
Collapsing
13 14
General technical data
HMV (medical aids register) no. 18.50.02.0131
Total length 107 cm / 92 cm
Overall height 90 - 95 cm
Seat depth 42 cm
Seat height 49 cm - 54 cm
Height of backrest 39 cm
Footrest length 36 - 47 cm
Max. load 130 kg
Minimum turning radius R49,5 and R70,0 cm
Angle of seat inclination [°] 4.2°
Angle of backrest inclination [°] 15°
Distance between footrest and seat 35,5 - 47,5 cm
Angle between leg and seat [°] 110°
Distance between armrest and seat 23,2 cm
Position of front end of armrest 33,5 cm
Diameter of handrim 53,0 cm
Product Ecotec 2G standard wheelchair
Seat width 38 cm 42 cm 46 cm 50 cm
Without drum brake 910300100 910300200 910300300 910300400
Total width without
drum brake 56,5 cm 60,5 cm 64,5 cm 68,5 cm
Width, folded 30 cm 30 cm 30 cm 30 cm
Weight 18,6 kg 18,8 kg 19 kg 19,2 kg
Product Ecotec 2G standard wheelchair
Seat width 38 cm 42 cm 46 cm 50 cm
With drum brake 910350100 910350200 910350300 910350400
Total width with
drumbrake 59 cm 63 cm 67 cm 71 cm
Width, folded 32 cm 32 cm 32 cm 32 cm
Weight 19,6 kg 19,8 kg 20 kg 20,2 kg
Technical data
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
• Check the condition of the tires regularly. They are
„fail-safe,“ meaning that you do not have to check air
pressure or fi ll them with air. Always check the tires for
tears or other damage, however.
19
… 9 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Drive Ecotec 2G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info