Bedienungsanleitung Drive ST4D 2G PLUS (Seite 21 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

801276

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Instructions for use ST4D 2G / ST4D 2G PLUS

Drive Medical GmbH & Co. KG | As per: 04.05.2020 | Errors and alterations excepted

Instrument panel

1. On/O light / Error code display

2. Battery display

3. Speed controller

4. Control lever

5. Warning light

6. Indicators

7. Fast/slow drive switch

8. Horn

Use

Ignition key

To start the electric scooter, turn the key to the right; the

instrument panel is now lit up. To switch o, turn the key

to the left; the instrument panel turns o and the key can

be removed.

Warning: Never switch o the ignition while you are

driving since this leads to an immediate stop and possi-

ble damage or injury.

Control levers

The electric scooter is driven by operating the control

lever on the side of the instrument panel. To drive the

electric scooter forwards, move the right control lever in

the direction of the operator. To drive the electric scooter

backwards, move the left control lever in the direction of

the operator. The horn generates a beep when the ve-

hicle moves backwards. The longer the control lever is

pressed, the faster the electric scooter moves.

To stop the electric scooter, release the control lever; the

electromagnetic brake automatically engages.

Warning: Never operate the left and right control levers

at the same time.

Brakes

By releasing the control lever, the vehicle brakes auto-

matically. When the vehicle comes to a stop, the mag-

netic brake automatically closes. The scooter is now se-

cured against rolling away.

In an emergency, the user can stop the electric scooter

by operating the hand brake on the right on the hand grip

of the steering column.

Warning: Never put the vehicle into neutral on inclines. In

this case, the brake will not grip.

Setting the speed

The speed of the elec-

tric scooter can be in-

creased by turning the

speed controller to the

right (rabbit symbol) or

reduced by turning the

speed controller to the

left (turtle symbol).

Warning: Never adjust the speed setting while driving

since this can lead to a loss of control. Do not select the

maximum speed when driving indoors.

When the electric scooter is used indoors or in pedes-

trian areas (such as sidewalks or shopping areas), the

lowest speed setting should be selected. If the electric

scooter is used on the street, the high speed setting can

be selected.

Press the “snail” button (no. 7 / pic. 1) to switch between

the two speed levels. In the slow speed level, the speed

is reduced by about half.

Warning: Always use the low speed setting when you

are driving indoors or on a sidewalk.

Note: Set the speed to maximum to drive up an incline

and to minimum for driving downhill.

Horn

By pressing the “horn” button, a beep sounds; the beep

is muted as soon as you release the button.

Indicators

Use the respective indicator to indicate your direction

when driving around a curve. Press the same button

again to switch o the indicator.

Light

Turn the ignition key all the way to the right to switch on

the light.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Drive ST4D 2G PLUS Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info