Bedienungsanleitung Drive ST4D 2G (Seite 24 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

801275

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Instructions for use ST4D 2G / ST4D 2G PLUS

Drive Medical GmbH & Co. KG | As per: 04.05.2020 | Errors and alterations excepted

Recommendations:

If necessary, please ask your dealer for assistance with

maintenance and replacing the battery.

1. Ensure that the battery cables are connected prop-

erly and secure the cover once again.

2. Do not use the battery to charge telecommunication

devices or other articles.

3. The battery performance varies with outdoor condi-

tions; the driving performance is lower in the winter.

If the vehicle is not driven for a longer period of time,

charge the battery at least once per month.

4. Replace both batteries at the same time.

Overload switch

Because of excessive loads, for example, due to steep

inclines, the overload switch can pop out in order to pro-

tect the motor and electronics from damage.

Tires

The condition of the tires is inﬂuenced by how you drive

the electric scooter and on what surface it is driven.

Please check the tread depth of the tires regularly. Re-

place tires when the tread depth is less than 1 mm. The

tire pressure for the best handling and range should be

approx. 2.5 - 3.5 bar.

Driving in the street

You may drive your electric scooter in trac on the side-

walk or bicycle path. Please be aware of the following:

You must ensure in any case that your scooter is in prop-

er working condition.

This includes:

• A functional braking system.

• Passive illumination: Red reﬂectors in the rear and yel-

low or white reﬂectors on the sides.

• Active illumination: White headlights in the front, red

rear lights in the rear, white or yellow blinkers as direc-

tional indicators.

Since your speed in street trac could be underestimat-

ed or since you may be overlooked by other people in

trac, you should take preventive steps:

• Wear light, reﬂective clothing and wear your safety belt

(if available).

• You may wish to attach a signal ﬂag on a ﬂexible post

to the scooter. These ﬂags are available in a bicycle

accessory shop.

• Always drive defensively and anticipate the behavior

of other people on the road.

• Check whether the seat is correctly installed and

snapped into place in the forward position.

• Ensure that the steering column and the seat are ori-

ented for a comfortable driving position.

• Fold the armrests down so that you can place your

arms on them.

• Switch the ignition on. If necessary, switch the head-

light on.

• Check the battery display to determine whether the

current is adequate for your trip. If you are not sure

regarding the remaining energy, charge the batteries

before your trip.

• Set the speed selection to a setting which is safe and

comfortable for you.

• Check that the control lever is working properly.

• Check that the electromagnetic brake is working

properly.

• Ensure that your immediate environment is safe before

you drive on the road. Use a low speed setting when

driving on a sidewalk or indoors.

• Caution: Never operate the left and right side of the

control lever at the same time. As a result, you will not

be able to control your electric scooter and this can

lead to damage or injuries.

• Never switch o the ignition while you are driving since

this leads to an immediate stop and possible damage

or injury.

• Do not select the maximum speed when driving

indoors.

• Do not switch speeds while driving. A sudden change

in speed can jeopardize you and others and damage

your electric scooter.

• Do not place any magnetic objects near the electrical

parts of the electric scooter since these could impair

the safe operation of the electric scooter.

• Use caution when driving in high-trac or crowded

areas.

• When driving in reverse, be aware of people and

objects behind your vehicle. During reverse driving,

the electric scooter emits an acoustic warning sound.

Stopping and parking

Completely release the control lever. The vehicle brakes

automatically and stops.

Switch the ignition key to OFF. Then take the key out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Drive ST4D 2G Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info