Bedienungsanleitung DRU GLOBAL 70 (Seite 29 von 60) (Englisch, Holländisch)

528137

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

Global 70 / 70 XT

INSTALLATION MANUAL

3.3 Precautions / safety instructions during

installation

Carefully observe the following precautions/safety

regulations:

• you should only install and maintain the appliance if you

are a competent installer in the ﬁ eld of atmospheric gas-

ﬁ red heating;

• do not make any changes to the appliance;

• use non combustible and heat-resistant materials for the

chimney breast, including the top of the chimney breast,

the material in the chimney breast and the back wall

against which the appliance will be placed;

• take sufﬁ cient measures to prevent temperatures of a wall

behind the chimney breast becoming too high, including

the materials and/or objects behind the wall;

• comply with the minimum required internal measure-

ments of the chimney breast;

• ventilate the chimney breast by means of the ventilation

holes, which will form a combined passage of at least

200 cm

;

• only use the ﬂ ue gas discharge / combustion air supply

system supplied by DRU;

• do not place the appliance too tightly against the back

wall;

• make sure the space between the adjustable feet is kept

free;

• do not cover the appliance and/or do not wrap it in an

insulation blanket or any other material;

• make sure that combustible objects and/or materials have

a distance from the appliance of at least 500 mm

• only ever use the supplied wood set;

• place the wood set exactly as described;

• make sure the pilot burner and the space around it is kept

free;

• make sure thermocouple 2 and the space around it are

kept free;

• make sure there is no dirt in gas pipes and connections;

• mount a gas tap directly next to the appliance;

• check the connections for gastightness before using the

appliance;

• use heat resistant electrical wiring;

• place the electrical wiring in such a way that they are free

from the appliance;

• replace torn or broken panes;

• avoid blocking of the pressure equalization hatch(es) on

top of the appliance;

• check whether the pressure equalization hatch(es) ﬁ t well

onto the sealing surface, prior to building in the appliance;

• do not ignite the appliance until it is fully installed.

4. Instructions

Observe the following items during installation in order to

guarantee a proper and safe operation of the appliance:

• mount the control box as low as possible. The control

box is not part of the appliance's standard equipment and

is available at your dealer;

• avoid that the ignition cable runs over the receiver;

• avoid that the ignition cable touches or crosses the

antenna;

• make sure the ignition cable cannot come into contact

with other wires;

• avoid that the ignition cable runs alongside metal parts, in

order to prevent weakening of the spark;

• properly ﬁ nish the edges in case of a tight construction;

• do not apply plaster on or over the ﬂ anges;

• avoid damages when removing/placing the pane;

• clean the pane before you use the appliance, in order to

prevent dirt from burning in the glass;

• make sure that the wires of thermocouple 2 cannot come

into contact with hot parts.

5. Removing the packaging

Note the following items when removing the packaging:

• Check the appliance for damages during transport.

• If necessary, contact DRU Service.

After removing the packaging, you should have the following

components:

- Socket spanner; you will ﬁ nd it in the space between the

assembly frame and the combustion chamber;

- Decorative strips; you will ﬁ nd them in the abovementi-

oned space as well;

After removing the pane, you can take the wood set and

the box with parts out of the combustion chamber.

!Caution Avoid damages when removing/placing the

pane.

• Remove the pane as described in section 6.10.1.

• Remove the wood set from the combustion chamber.

• Remove the box containing parts from the combustion

chamber.

In appendix 1/ table 5 you can see which parts you should

have after removing the packaging.

• Contact DRU Service if you do not have all the parts after

you ﬁ nished removing the packaging.

• Dispose packaging in accordance with local regulations.

6. Installation

!Caution Install the appliance in the order described

in this chapter.

6.1 Regulations

• Observe the applicable (installation) regulations.

• Observe the regulations/instructions in this manual.

6.2 Type of gas

The data plate indicates for which type of gas, gas pressure

and for which country this appliance is intended. The data

plate is connected to a chain. It should remain connected to

the chain.

Check whether the appliance is suitable for

the type of gas and the gas pressure used at

the location.

Caution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DRU GLOBAL 70 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DRU GLOBAL 70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info