Bedienungsanleitung Dual Saw CS 490 (Seite 29 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Türkisch)

578050

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

• Insert a lubrication pin in the lubrication unit, as shown in Figure 20.

• Use the lubrication pin to transfer the wax to the saw blades as required.

GENERAL MAINTENANCE

• Repairs on the tool may be carried out by qualiﬁed specialist staff only. Maintenance or repair work

that is not carried out by qualiﬁed staff may increase the risk of injury. Contact customer services with

all questions regarding repairs.

• For maintenance or repair work on the tool, identical spare parts need to be used. Follow the instruc-

tions in the repair sections of this manual. The use of non-authorised parts or the non-observance of

repair instructions increases the risk of electric shock and injury. Certain detergents, such as petrol,

carbon tetrachloride, ammonia, etc., may cause damage to the plastic parts.

• Do not use any solvents to clean the plastic parts. Many commercially available solvents cause damage

to most types of plastic. Remove dirt, carbon dust, etc. with a clean cloth.

• It is known that electric tools that are used for work on boats and sports cars with ﬁbre optic parts,

hard ﬁbre parts, grout or gypsum wear out more quickly and may fail early. The abrasion and chip-

pings of these materials may damage the components of electric tools, such as the bearing, brushes,

rectiﬁers, etc. After processing these materials, the tool therefore needs to be cleaned particularly

thoroughly.

CLEANING AND STORAGE

• Resin and other materials that easily stick to the sides of the saw blade often contribute to the saw

blade overheating. This may result in it corrugating or even bursting. For this reason, the saw blades

must always be kept clean. The saw blades should always be cleaned with a solvent. Never attempt to

clean the saw blades with a hard object.

• Saw blades that are not used should be cleaned well, treated with a rust protection agent and stored in

their original cover.

LUBRICATING

• All bearings in this tool were lubricated for the life cycle of the tool with a sufﬁcient quantity of a

high-quality lubricant. Under normal operating circumstances, the tool requires no further lubrication.

DOUBLE INSULATION

• Double insulation is a safety concept for electric tools which makes the use of a regular 3-conductor

power cable with earthing unnecessary. All open metal parts are insulated from the internal motor

components by protective insulation. Double-insulated electric tools do not need to be earthed.

EXTENSION CABLE

• The use of an extension cable has a minor loss of output as a result. To keep this loss of output as small

as possible and to prevent overheating, you should use an extension cable that is suitable for the power

need of the tool.

MAINTAINING THE SAW BLADES

• Exclusively use DUALSAW™ CS 490 saw blades developed speciﬁcally for this tool. Other saw blades

do not suit the installation device precisely and may result in the user losing control of the saw.

• Do not use blunt or damaged saw blades. Blunt or wrongly set saw blades result in a narrow cut groove

and increased friction. This may cause the saw blade to jam, resulting in recoils.

• Ensure that the saw blades are clean, sharp and correctly adjusted. When using blunt saw blades, the

saw is under greater strain and the risk of recoils increases. Keep the replacement saw blades ready so

that you can always use sharp saw blades.

• Resin and rubber-like residues on the saw blade slow down the cutting speed of the saw. Use a special

solvent for resin, hot water or a grease remover to remove adhesive residues. Do NOT use petrol.

• Never attempt to use the saw with only one saw blade. This results in a recoil of the saw in the directi-

on of the user, which may cause severe injuries.

MAINTENANCE

WARNING!

For repair or maintenance work on the tool, identical spare parts need to be used. The use of other

parts may cause hazards or result in damage to the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dual Saw CS 490 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info