Bedienungsanleitung Durkopp Adler 827 (Seite 61 von 80) (Englisch)

612088

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

7 Pneumatic connection

Caution:

The pneumatic units will only operate properly at a supply

pressure of 8 to 10 bar. The special sewing machine’s

operating pressure is 6 bar.

Pneumatic-connection pack

A pneumatic-connection pack for stands with compressed-air

maintenance units is available (Order No. 0797 003031).

It contains the following components:

- Connection hose, 5 m long (Ø = 9 mm)

- Hose nozzles and ties

- Plug-and-socket connector

Connecting the compressed-air maintenance unit

–

Attach the compressed-air maintenance unit 1 with bracket,

screws and strap to the stand-brace.

–

Connect the unit to the compressed-air supply with the

connection hose 4 (Ø = 9 mm) and connector R1/4".

Connecting the compressed-air maintenance unit to the upper

part of the sewing machine

–

Unscrew and remove the cover 6.

–

Connect the hose 3 (in the accessory pack) to the distributor plate

on the machine head.

–

Replace the cover 6.

Adjusting the operating pressure

The operating pressure is 6 bar.

It can be read off at the pressure gauge 4.

–

To adjust the operating pressure raise and tur n handle 2:

Clockwise to increase the pressure.

Counter-clockwise to reduce the pressure.

–

Press the handle 2.

7 Pneumatic connection

Caution:

The pneumatic units will only operate properly at a supply

pressure of 8 to 10 bar. The special sewing machine’s

operating pressure is 6 bar.

Pneumatic-connection pack

A pneumatic-connection pack for stands with compressed-air

maintenance units is available (Order No. 0797 003031).

It contains the following components:

- Connection hose, 5 m long (Ø = 9 mm)

- Hose nozzles and ties

- Plug-and-socket connector

Connecting the compressed-air maintenance unit

–

Attach the compressed-air maintenance unit 1 with bracket,

screws and strap to the stand-brace.

–

Connect the unit to the compressed-air supply with the

connection hose 4 (Ø = 9 mm) and connector R1/4".

Connecting the compressed-air maintenance unit to the upper

part of the sewing machine

–

Unscrew and remove the cover 6.

–

Connect the hose 3 (in the accessory pack) to the distributor plate

on the machine head.

–

Replace the cover 6.

Adjusting the operating pressure

The operating pressure is 6 bar.

It can be read off at the pressure gauge 4.

–

To adjust the operating pressure raise and tur n handle 2:

Clockwise to increase the pressure.

Counter-clockwise to reduce the pressure.

–

Press the handle 2.

7 Pneumatic connection

Caution:

The pneumatic units will only operate properly at a supply

pressure of 8 to 10 bar. The special sewing machine’s

operating pressure is 6 bar.

Pneumatic-connection pack

A pneumatic-connection pack for stands with compressed-air

maintenance units is available (Order No. 0797 003031).

It contains the following components:

- Connection hose, 5 m long (Ø = 9 mm)

- Hose nozzles and ties

- Plug-and-socket connector

Connecting the compressed-air maintenance unit

–

Attach the compressed-air maintenance unit 1 with bracket,

screws and strap to the stand-brace.

–

Connect the unit to the compressed-air supply with the

connection hose 4 (Ø = 9 mm) and connector R1/4".

Connecting the compressed-air maintenance unit to the upper

part of the sewing machine

–

Unscrew and remove the cover 6.

–

Connect the hose 3 (in the accessory pack) to the distributor plate

on the machine head.

–

Replace the cover 6.

Adjusting the operating pressure

The operating pressure is 6 bar.

It can be read off at the pressure gauge 4.

–

To adjust the operating pressure raise and tur n handle 2:

Clockwise to increase the pressure.

Counter-clockwise to reduce the pressure.

–

Press the handle 2.

7 Pneumatic connection

Caution:

The pneumatic units will only operate properly at a supply

pressure of 8 to 10 bar. The special sewing machine’s

operating pressure is 6 bar.

Pneumatic-connection pack

A pneumatic-connection pack for stands with compressed-air

maintenance units is available (Order No. 0797 003031).

It contains the following components:

- Connection hose, 5 m long (Ø = 9 mm)

- Hose nozzles and ties

- Plug-and-socket connector

Connecting the compressed-air maintenance unit

–

Attach the compressed-air maintenance unit 1 with bracket,

screws and strap to the stand-brace.

–

Connect the unit to the compressed-air supply with the

connection hose 4 (Ø = 9 mm) and connector R1/4".

Connecting the compressed-air maintenance unit to the upper

part of the sewing machine

–

Unscrew and remove the cover 6.

–

Connect the hose 3 (in the accessory pack) to the distributor plate

on the machine head.

–

Replace the cover 6.

Adjusting the operating pressure

The operating pressure is 6 bar.

It can be read off at the pressure gauge 4.

–

To adjust the operating pressure raise and tur n handle 2:

Clockwise to increase the pressure.

Counter-clockwise to reduce the pressure.

–

Press the handle 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 827 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 827

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info