Bedienungsanleitung Dyson CU Beam Down (Seite 73 von 80) (Alle Sprachen)

761229

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

USEN

THANK YOU FOR CHOOSING TO BUY A DYSON LIGHT

DYSON CUSTOMER CARE

Your fixture is covered for 5 years from the date of purchase, subject to the terms of the limited warranty.

If you have any questions about your fixture, call the Dyson Helpline with your serial number and details of where and when

you bought the fixture.

Note your serial number here for future reference.

Your serial number can be found on the registration sheet in the box, and also on the large information sticker, which can be

found inside the driver box when the fixture is unpacked.

This illustration is for example purposes only.

A comprehensive installation guide is enclosed with the fixture's packaging. This contains detailed information on the correct

installation of the fixture, which MUST be adhered to completely, including routing of electrical cables. Damage caused by

incorrect installation is not covered by your warranty.

The instructions in this manual and the installation guide must be followed completely, as failure to do so may result in incorrect

operation, damage to property and/or personal injury. Dyson will not be held liable for any damage to property or personal

injury, or any loss of business or revenue, if you, your staff, your installer or service engineers have not followed the instructions

given in this manual and the installation guide.

CONFORMITY INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment.

YOUR WARRANTY

TERMS AND CONDITIONS OF THE DYSON 5 YEAR LIMITED WARRANTY.

If you have registered your fixture online, your warranty will start from the date of purchase. Please retain your proof of

purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture, according

to Dyson’s records.

This warranty will be void if the fixture is installed and used in a country outside the one in which it was sold.

WHAT IS COVERED

5 YEAR LIMITED WARRANTY

All factory parts of your light are covered against original defects, material and workmanship when used in accordance with

the owner’s manual and installation guide for a period of 5 years from the start of your warranty.

• Any parts that are returned and replaced by Dyson will become the property of Dyson.

• The replacement of any part of your unit under warranty will not extend the period of warranty.

• This limited warranty provides benefits, which are additional to and do not affect any statutory rights you may have as a

consumer. This limited warranty gives you legal rights, and you may have other rights which vary from state to state.

WHAT IS NOT COVERED

Dyson shall not be liable for costs, damages or repairs incurred as a result of, due to, or from:

• Careless operation or handling, misuse, abuse and/or lack of maintenance or use not in accordance with the Dyson

Operating Manual.

• Use of parts not in accordance with the Dyson Operating Manual.

• Use of parts and accessories other than those produced or recommended by Dyson.

• Faulty installation or installation that does not precisely follow the installation instructions supplied by Dyson (except where

installed by Dyson).

• Repairs or alterations carried out by unauthorized parties or agents.

• External sources such as weather, electrical outages or power surges.

• Normal wear and tear (e.g. fuse, etc.).

MANDATORY INSTALLATION

REQUIREMENTS FOR THE US &

CANADA

TO ENSURE THAT THE INSTALLATION OF THE FIXTURE COMPLIES

WITH UL REGULATIONS, THIS ADDITIONAL INSTALLATION

INFORMATION MUST BE FOLLOWED:

1. For Recess Mounting - The driver box must be installed within a metal

enclosure with has conduit access above the ceiling. This must be

obtained and fitted before installation of the fixture.

2. For Surface Mounting - An additional junction box adapter must be used

to connect the driver box to the junction box. Please contact the Dyson

Helpline to obtain this part.

Dyson CU Beam Down Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dyson CU Beam Down

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info