Bedienungsanleitung Dyson DC55 (Seite 8 von 12) (Englisch)

702446

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

USING YOUR DYSON APPLIANCE

PLEASE READ THE ‘IMPORTANT SAFETY INSTRUCTIONS’ IN THIS DYSON

OPERATING MANUAL BEFORE PROCEEDING.

ASSEMBLY

• Lie the appliance on its back.

• Attach the cleaner head by sliding it on to the connections on the lower front

part of the ball. Ensure the electrical plug on the cleaner head fits into the twin

- block connection on the body of the appliance, which is directly above the

airway. Push firmly: the cleaner head will click into place.

• Stand the appliance up straight.

• Attach the wand handle by sliding it on to the top of the appliance. The spring

clip in the handle will click into place.

• Ensure the hose is straight. Press the red button on the hose. Slide the wand into

the hose.

• Ensure the wand and hose sit in the recess of the handle. Slide the end of the

wand down into the handle to secure it.

• Close the wand cap.

• Slide the tool holder onto the side of the duct as shown.

• Ensure the cyclone and clear bin unit is secured to the main body of

the appliance.

• Attach the tools as shown. In use, the tools can be attached to either the hose or

the wand.

• Wind the cable around the cable hooks. Secure with the clip.

• To watch a short online video visit:

– UK – www.dyson.co.uk/dc55gettingstarted

– ROI – www.dyson.ie/dc55gettingstarted

OPERATION

• Unwind the cable.

• Plug the appliance into the mains electricity supply.

• To switch ‘ON’ or ‘OFF’ press the red power button, located as shown.

• To use, recline the handle. The stabiliser stand will automatically lift up.

• After use, return the appliance to the upright position, pushing it firmly into

place. The stabiliser wheels will automatically lower.

• Then unplug the appliance, coil the cable safely and put the appliance away.

• Switch ‘OFF’ the appliance, unplug and ensure it is upright before:

– changing or using tools

– removing the hose or airway inspection parts.

• Use the cyclone carry handle to carry the machine.

SELF-ADJUSTING CLEANER HEAD WITH

SUCTION CONTROL

• This cleaner head is used for testing with the European Regulations:

No. 665/2013 and No. 666/2013.

POWERFUL SUCTION

• For vacuuming of lightly soiled carpets, rugs and hard flooring.

– Your appliance is pre-set to this level of suction when you take it out of

the box.

MAXIMUM SUCTION

• For vacuuming durable floor coverings, hard floors and heavily soiled carpets

and rugs.

– To switch to this setting, move the suction control slider on top of the cleaner

head as shown.

– CAUTION: The suction of this mode can damage delicate flooring. Before

vacuuming, check the flooring manufacturer’s cleaning recommendations.

– If the suction power of Maximum suction prevents easy maneuverability,

switch to Powerful suction mode.

– To switch back to Powerful suction mode, move the suction control slider back

to its original position, as shown.

CARPETS OR HARD FLOORS

• The brush bar will always default to ‘ON’ (spinning) each time you switch the

appliance ‘ON’ and recline it for cleaning.

• The brush bar will not rotate when the appliance is upright.

• To switch the brush bar 'OFF' (e.g. for delicate rugs and delicate flooring):

– switch the appliance ‘ON’

– recline the appliance

– press the brush bar ‘ON/OFF’ button – the brush bar will stop spinning.

• The brush bar will automatically stop if it becomes obstructed. See ‘Brush bar –

clearing obstructions’.

• Before vacuuming your flooring, rugs and carpets, check the manufacturer’s

recommended cleaning instructions.

• Some carpets may fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming with the brush bar switched 'OFF' and

consulting with the flooring manufacturer.

• The brush bar on the appliance may damage some carpet types. If you are

unsure, turn ‘OFF’ the brush bar.

• Check the brush bar regularly and clear away any debris (such as hair). Debris

left on the brush bar may cause damage to flooring when vacuuming.

LOOKING AFTER YOUR DYSON APPLIANCE

• Do not carry out any maintenance or repair work other than that shown in this

Dyson Operating Manual, or advised by the Dyson Helpline.

• Only use parts recommended by Dyson. If you do not this could invalidate

your guarantee.

• Store the appliance indoors. Do not use or store it below 3°C (37.4°F). Ensure

the appliance is at room temperature before operating.

• Clean the appliance only with a dry cloth. Do not use any lubricants, cleaning

agents, polishes or air fresheners on any part of the appliance.

• If used in a garage, always wipe the base plate and ball with a dry cloth

after vacuuming to clean off any sand, dirt, or pebbles that could damage

delicate floors.

VACUUMING

• Do not use without the clear bin and filters in place.

• Fine dirt such as flour should only be vacuumed in very small amounts.

• Do not use the appliance to pick up sharp hard objects, small toys, pins, paper

clips, etc. They may damage the appliance.

• When vacuuming, certain carpets may generate small static charges in the

clear bin or wand. These are harmless and are not associated with the mains

electricity supply. To minimise any effect from this, do not put your hand or

insert any object into the clear bin unless you have first emptied it and rinsed it

out with cold water (see ‘Cleaning the clear bin’).

• Do not work with the appliance above you on the stairs. When cleaning stairs it

is recommended that the handle is not extended and that you use a tool on the

end of the hose rather than the wand.

• Do not put the appliance on chairs, tables, etc.

• Before vacuuming highly polished floors, such as wood or lino, first check that

the underside of the floor tool and its brushes are free from foreign objects that

could cause marking.

• Do not leave the cleaner head in one place on delicate floors.

EMPTYING THE CLEAR BIN

• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.

• Switch ‘OFF’ and unplug before emptying the clear bin.

• To remove the cyclone and clear bin unit, press down on the red button on the

top of the carrying handle on the cyclone.

• To release the dirt, press all the way down on the same red button on the top of

the carrying handle on the cyclone.

• To minimise dust/allergen contact when emptying, encase the clear bin tightly in

a plastic bag and empty.

• Remove the clear bin carefully from the bag.

• Seal the bag tightly, dispose as normal.

• To refit:

– ensure the airway in the bin base is clear of dust and dirt

– close the clear bin base so it clicks into place

– push the cyclone and clear bin unit into the main body of the appliance; it will

click into place

– ensure the cyclone and clear bin unit is secure.

CLEANING THE CLEAR BIN

• Remove the cyclone and clear bin (see ‘Emptying the clear bin’).

• To separate the cyclone unit from the clear bin press the red button to open

the clear bin base. This exposes a small silver button behind the red opening

mechanism. Press the silver button (on its ribbed area) and separate the cyclone

unit from the clear bin.

• Clean the clear bin with cold water only.

• Do not use detergents, polishes or air fresheners to clean the clear bin.

• Do not put the clear bin in a dishwasher.

• Do not immerse the whole cyclone in water or pour water into the cyclones.

• Clean the cyclone shroud with a cloth or dry brush to remove any lint and dust.

• Ensure the clear bin is completely dry before replacing.

• To refit:

– fit the cyclone shroud into the clear bin so that the silver button clicks

and engages

– close the clear bin base so it clicks into place

– push the cyclone and clear bin unit into the main body of the appliance; it will

click into place

– ensure the cyclone and clear bin unit is secure.

WASHING YOUR FILTERS

• Your appliance has two washable filters, located as shown.

• Check and wash the filters regularly according to instructions to

maintain performance.

• Switch ‘OFF’ and unplug before checking or removing the filters.

• The filters may require more frequent washing if vacuuming fine dust.

• Wash with cold water only. Do not use detergents.

• Do not put the filters in a dishwasher, washing machine, tumble dryer, oven,

microwave or near a naked flame.

Filter A

• Remove the cyclone and clear bin (see ‘Emptying the clear bin’).

• Release the catch on the front of the cyclone handle and then remove the filter.

• Wash the filter with cold water only. Hold under a tap and run water through the

open end until the water runs clear. Turn upside down and tap out.

• Squeeze and twist with both hands to make sure the excess water is removed.

• Run water over the outside of the filter until the water runs clear.

• Squeeze and twist with both hands to make sure the excess water is removed.

• Stand the filter on its wide, open end to dry. Leave to dry completely for a

minimum of 24 hours.

• Replace the filter into the cyclone. Swing the handle back into place. Ensure the

latch clicks to engage and is secure. Fit the cyclone and clear bin unit onto the

appliance (instructions above).

Filter B

• Lie the appliance on its side.

• To remove filter B:

– turn the blue central locking dial on the outer cover of the ball anti-clockwise

until the cover is released

– lift off the cover

– turn the filter one-quarter anti-clockwise to release.

• Wash the filter with cold water only.

• Filter B should be rinsed and tapped out until the water runs clear, then tapped

out again to ensure all excess water is removed. (Tap on the plastic rim, not the

filter material.) Leave to dry completely for a minimum of 24 hours.

• It is normal for the filter in the ball to turn grey in colour.

• To refit filter B:

– refit the filter on to the ball

– secure the filter by turning it clockwise so the white arrows align.

• When refitting the outer cover of the ball, keep turning the central locking dial

clockwise. When it starts to click it is locked.

• To watch a short online video visit:

– UK - www.dyson.co.uk/dc55filterwash

– ROI - www.dyson.ie/dc55filterwash

BLOCKAGES – THERMAL CUT-OUT

• This appliance is fitted with an automatically resetting thermal cut-out.

• Large items may block the tools or wand inlet. If any part becomes blocked the

appliance may overheat and automatically cut-out.

Dyson DC55 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info