704381

Easymaxx Z05592 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
3
Dear customer,
We are delighted that you have decided to purchase this LED
motion detector. If you have any questions, please contact
customer service via our website:
www.service-shopping.de
Proper use/warranty
• This product is an LED motion detector. The light turns on if
movement is detected within a radius of approx. 2 metres in
dark environments.
• The product is designed for private use and is not intended
for commercial use. Only use the product as instructed. Any
other use is deemed improper. Store the instructions in a safe
place.
• Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
Safety and care instructions
Risks of injury
❐ Plastic foils pose a risk of choking if swallowed! Keep the
packaging material away from children and animals.
❐ Risk of injury! The product is not a toy! Keep the product out
of the reach of children and animals.
❐ Batteries may be life threatening if swallowed. For this
reason, please stow the batteries and the product in a place
that is not accessible for children and animals. If a battery has
been swallowed, you must seek immediate medical attention.
❐ If a battery has leaked, avoid contact between your skin,
eyes and mucous membranes and the battery acid. In the
event of contact with the battery acid, rinse the affected areas
instantly with plenty of clean water and immediately consult
a physician.
Proper handling of the batteries
❐ Before inserting the batteries, check that the contacts in the
product and on the batteries are clean and, if necessary,
clean them.
❐ Only use the battery type specifi ed in the technical data.
❐ Always replace all batteries. Do not use different battery
types, brands or batteries of different capacitances. When
changing batteries ensure correct polarity (+/-).
❐ Remove the batteries from the product if they are empty or
if you are not using the product for an extended period. This
way, you can avoid damages attributed to leaking.
❐ Immediately remove any leaking batteries from the product.
Clean the contacts before you insert a new battery.
❐ The batteries may not be charged or reactivated using other
means, they may not be disassembled, disposed of in fi re,
immersed in liquids or be short circuited.
Proper handling of the product
❐ In the event of extreme weather (e.g. storm, hail) or if you do
not wish to use the product for a prolonged period of time, we
recommend that you turn the product off, remove the batter-
ies and store the product in a dry place.
❐ Hang the product in a place that is safe, secure and dry.
❐ If you use screws to mount the product, make sure that there
is no risk of damaging pipes or lines located in the intended
drilling area before drilling. Before mounting the product on
the wall, inquire at a specialist dealer about suitable fastening
material.
❐ Never submerge the product in water or other liquids! It is
only splash-proof.
❐ Do not allow the product to fall and do not subject it to severe
percussions.
❐ Do not look directly into the light emitted by the LED lights
and do not point the LED lights directly at people or animals.
❐ Do not disassemble the product if it is defective. Only have
the product repaired by a qualifi ed workshop or by customer
service.
❐ Do not use the product if it exhibits visible damages.
❐ If the product gets dirty, wipe it off with a damp cloth. Do not
use corrosive or abrasive cleaning products to clean the
product! They could damage the surface.
Product contents
• 1 x motion detector
• 4 x type AA 1.5 volt batteries
• 1 x adhesive strip for mounting the motion detector
Not included in the product contents:
Alternative fastening material like screws, nails or dowels are not
included in the product contents!
Product overview
Front view
Motion detector with
LED lights; tiltable
Motion sensor
rotatable base
Rear view
Battery compartment
ON/OFF switch for activating
and deactivating the product
Bottom of the base
Slot for alternative fastening
materials (screws, nails etc.)
Application area for
adhesive strip
Not shown:
• Fastening material (adhesive strip)
GB
Operating instructions
Product number: Z 05592
Z 05592_V0
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Easymaxx Z05592 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info