2. Description
2.1. EASYNET GATEWAY device
The EASYNET GATEWAY has been designed to establish different connection paths between your ECOFOREST device and any type of
device that has a web browser, such as a mobile phone, a tablet, a PC, etc. Through the EASYNET GATEWAY you can access your
ECOFOREST device directly (Direct Access), through your local area network (Local Access) or through the Internet (Remote Access).
EASYNET GATEWAY kit components
1. Communication module (CPU).
2. Antenna.
3. Bus connection cable.
4. Power supply connector.
5. User and installer's manual
2.2. EASYNET web interface
The EASYNET interface is a web server running on the EASYNET GATEWAY that will allow you to interact with your ECOFOREST device
in a simple way. When you access the EASYNET GATEWAY, it will display the main screen of the EASYNET web interface. This lets you
view and set up the operating parameters of your ECOFOREST device in real time. The data shown on the screen vary depending on
the ECOFOREST device that you connect to the EASYNET GATEWAY and its settings.
To access the EASYNET web interface, you must install the equipment under one of the settings indicated in sections 3 and 4. Different
settings are available that will allow you to access the EASYNET web interface from your device (mobile phone, tablet, PC, etc.) via a
wireless access point, local area or the internet. Once you access the EASYNET web interface, you will have to enter your security
credentials. This information is available on the label of the GATEWAY EASYNET device.
▪ USERNAME: Device serial number (SN).
▪ PASSWORD: First 8 characters of the original wireless network (PWD) password.
Figure 2.1. Credentials for access to the EASYNET web interface.
If your device has been installed in a configuration that allows access via the internet (see section 4), you can also access the EASYNET
web interface easily by using your mobile phone to scan the QR code provided on the label of the GATEWAY EASYNET device.
