Bedienungsanleitung Edilkamin Logo (Seite 30 von 146) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

810792

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

- 30 -

ENGLISH

INSTRUCTIONS FOR USE

In the same way, adjust the shutdown times. The program

is conŎ rmed by pressing the MENU button when ‘Save

OK’ appears on the display.

When conŎ rming the ‘Weekly program’ the day to which

the program is to apply must be selected:

1 Mon; 2 Tues; 3 Wed; 4 Thurs; 5 Fri; 6 Sat; 7 Sun

Once you have chosen the day by scrolling through them

with the + and – keys, conŎ rm by pressing MENU and

proceed with the settings of the programs in the same way

as for the ‘Daily program’, selecting whether or not to

enable a program for each day of the week and choosing

the number and times of interventions.

Should you make a mistake whilst setting the programs

you can exit without saving by pressing the 0/1 key.

Note on ŏ ame variability

The ŏ ame may vary depending on the type of pellets

used, in addition to normal variability of the solid fuel

ŏ ame and regular cleaning of the combustion chamber

carried out automatically by the stove.

N.B. The automatic cleaning process performed by the

stove does not replace the need for the user to vacuum the

stove when cold, prior to ignition).

Pellet reserve warning

Stoves are equipped with an electronic pellet detection

system.

The detection system is integrated into the electronic

control board, allowing the stove to monitor how many

kilos of pellets are left. This veriŎ cation is implemented

at any point whilst the stove is in operation mode.

For correct system operation, it is important that the

following procedure is adhered with during the Ŏ rst

ignition (that must be implemented by the DEALER).

Before starting to use the pellet detection system, you

must load and consume a full sack of pellets. This

allows for a brief running-in of the loading system.

Hence, load 15 kg of pellets.

Then press the ‘reserve’ button once, thereby storing

the data into the memory that 15 kg have been loaded.

From now on the display will show the remaining pellets

as they decrease in kg (15…14...13).

Each time pellets are reloaded you must enter the quantity.

E.g. when loading 15 kg, simply press the ‘pellet

load’ button to enter this into the memory. For other

quantities, or in the event of an error, you can specify

the quantity using the pellet reserve menu as follows:.

Press the MENU button for 2 seconds to view the SETTINGS.

Press + or – consecutively to view T. Max E.

ConŎ rm by pressing MENU and the remaining quantity

of pellets will be displayed + that being loaded

(default is 15 and can be changed using the +/- keys).

Should the hopper run out of pellets, the stove will

block and ‘Stop/Flame’ will appear (see page 35).

Note: Every now and again remember to reset the “pellet

reserve warning” for it to function in a more reliable

manner.

For any clariŎ cation please contact the authorised

DEALER who performed the Ŏ rst 1st ignition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Logo Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info