Bedienungsanleitung Edilkamin Meg (Seite 31 von 178) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

810916

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

- 31 -

ENGLISH

SMOKE OUTLET

The boiler-stove must have its own smoke outlet (the smoke

cannot be discharged into a smoke ﬂ ue used by other devi-

ces).

The smoke is discharged through the 8 cm diameter outlet at

the back of the boiler-stove. A T-junction must be set up with a

condensation collection stopper at the beginning of the verti-

cal section. The smoke outlet must be connected to outside by

means of suitable steel pipes EN 1856 certiﬁ ed.

All piping must be hermetically sealed and, if necessary, insu-

lated.

To seal the various elements of the piping together, materials

resistant to high temperatures must be used (silicon or mastics

for high temperatures).

The pipe must be hermetically sealed. The material used to seal

and if necessary insulate the pipes, must be resistant to high

temperatures (high temperature silicone or mastic).

The only horizontal section allowed may be up to 2 m long.

It may have up to three 90° bends.

If the outlet is not ﬁ tted into a chimney ﬂ ue, a vertical section

and a wind guard are required (reference UNI 10683).

The vertical duct can be internal or external.

If the smoke channel (part of the pipe that goes from the boiler-

stove to the chimney ﬂ ue) is outside, it must be appropriately

insulated. If the smoke channel is ﬁ tted inside a chimney ﬂ ue,

the latter must be suitable for solid fuel.

If it is wider than 150 mm in diameter it must be improved by

entering a pipe that has a suitable cross-section and is made of

suitable material (e.g. 80 mm diameter steel).

All sections of the smoke duct must be accessible for inspec-

tion. If it is not removable, it must have inspection holes to

allow for cleaning.

The boiler-stove is designed to operate under any weather

conditions.

In the case of particularconditions, such as strong winds, safety

systems may intervene that extinguish the thermo stove. In this

case, do not operate the appliance while the safety devices are

disabled. If the problem persists, contact the Service Centre.

The plumbing connection must be formed by qualiﬁ ed

personnel that are able to issue a declaration of conformity

in terms of Ministerial Decree 37 ex Law 46/90.

All local and national laws and European standards must be

met when installing and using the appliance. In Italy, refer

to the UNI 10683 standard, as well as any regional or local

health-authority regulations.

It is necessary to refer to regulations in force in each country. If

installing in an apartment building, check with the management

company ﬁ rst.

VERIFY COMPATIBILITY WITH OTHER DEVICES

In Italy the boiler-stove MUST NOT be installed in the same

space as type B gas heating equipment (e.g. gas boilers, stoves,

and equipment served by an extraction hood) as the stove

may cause a vacuum in the space which may compromise or

inﬂ uence how these units work.

VERIFYTHE POWER SUPPLY

CONNECTION (the plug must be accessible)

The boiler-stove is supplied with a power cable that is to be

connected to a 230V 50 Hz socket, preferably ﬁ tted with a

magnetothermic switch.

The electrical system must comply with the law; particularly

verify the efﬁ ciency of the earthing system.

The power line must have a suitable cross-section for the boiler

power.

An inadequate earthing system can cause anomalies for which

Edilkamin cannot be held liable.

FIRE SAFETY DISTANCES AND LOCATION

For correct operation the boiler-stove must be level.

Check the load-bearing capacity of the ﬂ oor.

The boiler-stove must be installed in compliance with the fol-

lowing safety conditions:

-ﬂ ammability items must be kept at a minimum distance of 10

cm from the sides and back of the boiler-stove

- highly ﬂ ammable items must be kept at a minimum distance

of 80 cm if placed in front of the boiler-stove

- if the boiler-stove is installed on a ﬂ ammable ﬂ oor, a sheet of

heat insulating material must be placed between the boiler-sto-

ve and the ﬂ oor, which protrudes by at least 20 cm at the sides

and 40 cm at the front.

Flammable objects must not be placed above the boiler-stove

or at a distance that is any less than the stipulated safety distan-

ces. If connected to wooden walls or other ﬂ ammable mate-

rials, the smoke exhaust pipe must be appropriately insulated

with ceramic ﬁ bre or other similar material.

AIR INLET (to be mandatorily implemented)

The room where the boiler-stove is located must have an air in-

take with cross section of at least 80cm2 to ensurereplenishment

of the air consumed by combustion.

Alternatively, the boiler-stove air may be taken directly from

outside through a 4 cm steel extension of the pipe. In this

case,there may be condensation problems and it is necessary to

protect the air intake with a grille, which must have a free-

section of at least 12 cm². The pipe must be less than 1 metre

long and have no bends. It must end with section at 90° facing

downwards or be ﬁ tted with a wind guard. In any case all the

way air intake duct must be a free section of at least 12 cm².

The external terminal of the air inlet channel must be protected

with an anti-insect netting that does not reduce the 12 cm²

through passage.

INSTALLATION

TYPICAL EXAMPLES

Fig. 1 Fig. 2

A: insulated steel chimney ﬂ u, Insulated

B: minimum height 1.5 m, and however beyond the eaves of the roof

C-E: air intake from outside (through section at least 80 cm²)

D: steel chimney ﬂ ue inside existing masonry chimney ﬂ ue

CHIMNEY POT

The main characteristics are:

- an internal cross-section at the base, which is the same as that

of the chimney ﬂ ue

- an outlet cross-section which is no smaller than twice that of

the chimney ﬂ ue

- its position must be high enough to catch the wind and avoid

downdraft areas in turbulent wind..

Edilkamin Meg Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info