Bedienungsanleitung Einhell GE-EM 1536 HW (Seite 28 von 114) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

546966

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

- 28 -

8. Cleaning, maintenance and

ordering of spare parts

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The

ingress of water into an electric tool increases

the risk of an electric shock.

8.2 Carbon brushes

In case of excessive sparking, have the carbon

brushes checked only by a qualiﬁ ed electrician.

Important! The carbon brushes should not be rep

laced by anyone but a qualiﬁ ed electrician.

8.3 Maintenance

•

Worn out or damaged blades, blade mounts,

and bolts should be replaced as a set by an

authorized professional in order to keep the

equipment in balance.

•

Do not clean the lawn mower with running

water, particularly with high-pressure water.

Ensure that all mounting components (i.e.

screws, bolts, nuts etc.) are always tightened

so that the equipment can be safely operated

at all times.

•

Frequently check the grass catch assembly

for signs of wear.

•

Replace excessively worn or damaged parts

immediately.

•

Store your lawn mower in a dry room.

•

In order to ensure that you enjoy the equip-

ment for many years to come, all screwed

parts, as well as the wheels and axles, should

be cleaned and lubricated.

•

Keeping your lawn mower in good condition

not only ensures a long lifespan and high per-

formance, but also enables the equipment to

thoroughly cut your grass with minimal effort.

For best results, clean the lawn mower with a

brush or rag. Do not use any solvents or water

to remove dirt.

•

The blade is subjected to more wear and

tear than any other component. Therefore,

routinely check the condition of the blade

and make sure that it is tightly fastened. If the

blade is completely worn out, it must be im-

mediately replaced or ground sharp again. An

excessively vibrating mower means that the

blade is not properly balanced or has become

deformed from striking an object. In this case,

the blade must be repaired or replaced.

•

There are no parts inside the equipment

which require additional maintenance.

8.4 Replacing the blade

For safety reasons, we recommend having the

blade replaced by an authorized professional.Im-

portant. Wear work gloves! Only replace the blade

with a genuine Einhell replacement blade, as this

will ensure top performance and safety under all

conditions.

Carry out the following steps to change the

blade:

1. Undo the fastening screw (see Fig. 17).

2. Remove the blade and replace with a new

one.

3. When ﬁ tting the blade, make sure it is ins-

talled in the right direction. The blade’s air va-

nes must project into the motor compartment

(see Fig. 17). The dome mounts must be

aligned with the punch holes in the blade (see

Fig. 18).

4. Then retighten the fastening screw with a

wrench. The tightening torque should be ap-

prox. 25 Nm.

8.5 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

Spare blade art. no.: 34.055.90

Anl_GE_EM_1536_HW_M_SPK7.indb 28Anl_GE_EM_1536_HW_M_SPK7.indb 28 31.07.13 15:4831.07.13 15:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell GE-EM 1536 HW Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info