Bedienungsanleitung Einhell GE-TM 102 BS (Seite 27 von 52) (Deutsch, Englisch, Französisch)

605745

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

- 27 -

2. Check that all moving parts have reached a

complete standstill.

3. Remove the grass basket.

4. Remove the blockage with a stick.

5. Move forward a short distance before swit-

ching on the mower unit again.

6.3 After mowing

1. Always allow the engine to cool before you

put the lawn mower in an enclosed area.

2. Remove grass, foliage, grease and oil before

storing the mower. Do not place any objects

on top of the mower.

3. Before using the mower again, retighten all

nuts and screws. Tighten all screws which

were slackened.

4. Also be sure to empty the grass basket.

5. Disconnect the spark plug boot to prevent

unauthorized use.

6. Ensure that you do not park the mower next

to any source of danger. Petrol fumes can

lead to explosions.

7. Only original parts or parts approved by the

manufacturer may be used for repairs

(see address on the warranty certiﬁ cate).

8. Empty the petrol tank with a petrol extraction

pump if you are not intending to use the mo-

wer for an extended period of time.

9. Tell your children not to use the mower. It is

not a toy.

10. Never place petrol near an ignition source.

Always use a can that is approved to store

petrol. Keep petrol away from children.

11. Oil and maintain the equipment.

7. Cleaning, maintenance, storage,

transport and ordering of spare

parts

Important: The enclosed engine manual from

Briggs & Stratton provides maintenance informa-

tion and maintenance interval information on the

engine.

Important:

Never work on or touch any current-conducting

parts of the ignition system while the engine is

running. Pull the spark plug boot from the spark

boot before doing any maintenance or assembly

work. Never carry out any work on the equipment

while the engine is running. Work that is not de-

scribed in these operating instructions should

only be carried out by authorized workshops.

7.1 Cleaning

The lawn mower should be cleaned thoroughly

every time after it has been used. This particularly

applies to its underside and the blade mount.

It is easiest to remove dirt and grass immediately

after mowing. Dried grass remnants and dirt may

impair the mowing operation. Check if the grass

ejector chute is free of grass remnants and remo-

ve any if necessary. Never clean the engine using

a water jet or a high-pressure cleaner. The engine

must remain dry. Do not use aggressive cleaning

agents such as cold cleaners or petroleum ether.

In order to ensure that the majority of grass clip-

pings are picked up, the inside of both the grass

bag and especially the air grill must be cleaned

after each use.

Important. Do not use your hands or feet to re-

move clippings in or on the mower housing, but

instead use suitable tools such as a brush or a

hand broom.

7.2 Maintenance

Important: The enclosed engine manual from

Briggs & Stratton provides maintenance informa-

tion and maintenance interval information on the

engine.

Dispose of soiled maintenance material and ope-

rating materials at the appropriate collection point.

7.2.1 Blades

For safety reasons, have all blade sharpening,

balancing and mounting work carried out by an

authorized service center. To achieve optimal re-

sults, we recommend to have the blades checked

once a year.

Changing the blades (Fig. 53-54)

When changing the cutting unit, be sure to use

only genuine replacement parts. Never install a

blade from a diﬀ erent manufacturer.

1. Fig. 53

Screw (Item 1a) for right blade (Item 38) →

undo in a clockwise direction

Screw (Item 1b) for left blade (Item 39) →

undo in a counterclockwise direction

2. When you replace the blades, remember that

because of the diﬀ erent directions of rotation,

2 diﬀ erent blades have to be ﬁ tted. To ensure

that you ﬁ t the correct blades on the correct

sides, refer to the numbers stamped on the

blades:

Anl_GE_TM_102_BS_SPK7.indb 27Anl_GE_TM_102_BS_SPK7.indb 27 21.01.15 08:4821.01.15 08:48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell GE-TM 102 BS Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info