Bedienungsanleitung Einhell LE 30 (Seite 17 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

723951

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

- 17 -

9. Cleaning, maintenance and

ordering of spare parts

Be sure to pull out the power plug before

doing any maintenance and cleaning work!

•

Use only a soft cloth to clean the casing.

•

Do not use any aggressive chemicals, deter-

gents, chemically treated cleaning cloths or

solvents. They could damage the casing.

Cleaning the air ﬁ lter (every 2 weeks)

•

Remove the air inlet grille (Fig. 5 / Item 7) and

then the air filter washer (Fig. 5 / Item 6).Use

a vacuum cleaner.

•

If the filter is very dirty, wash it with warm wa-

ter (max. 40°C). Then allow it to dry thorough-

ly. Never expose the filter to the sun or other

sources of heat. Never reinsert the filter while

it is still damp.

Maintenance

•

There are no other parts inside the equipment

which require maintenance.

Storage

If you are not going to use the dehumidiﬁ er for

some time, proceed as follows:

•

Switch off the equipment, pull out the power

plug and roll up the power cable. (fig. 5/Pos.

•

Empty the water collector and dry it thorough-

ly.

•

Remove the rubber plug as described in sec-

tion 8 and tilt the device slightly to remove any

remaining water.

•

Clean the ventilation grille and the dust filter

cover the equipment and store it in a dry and

dust-free place.

Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

10. Storage

Store the equipment and accessories in a dark

and dry place at above freezing temperature. The

ideal storage temperature is between 5 and 30

°C. Store the electric tool in its original packaging.

11. Troubleshooting

•

The equipment does not start:

- Check whether the power plug has been

inserted properly.

- Is there a power failure?

- Is the red lamp of the water level indicator

lit? If it is, the water collector is full and must

be emptied or the collector is not inserted

properly.

- Do the room conditions lie within the opera-

ting range (see Technical Data)?

•

The equipment does not seem to be wor-

king:

- Is the ﬁ lter soiled?

- Is the air supply line or exhaust line blo-

cked?

- Is the room’s humidity already very low?

•

The equipment seems to be working very

poorly:

- Are too many doors and windows open?

- Is something in the room producing too

much humidity?

•

The equipment is very loud:

- Is the equipment vibrating because it is not

standing squarely or is tilted?

- Is the ﬂ oor uneven?

Important. Never try to repair the equipment

yourself. Contact your customer service

center.

Anl_LE_16_20_30_SPK7.indb 17Anl_LE_16_20_30_SPK7.indb 17 24.02.16 08:3324.02.16 08:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell LE 30 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info