Bedienungsanleitung Einhell RT-SD 3.6-2 Li (Seite 18 von 100) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

782358

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

- 18 -

4. Technical data

Motor power supply: ..............................3.6 V d.c.

Idling speed: ..........................................200 min-1

Clockwise/counter-clockwise: ........................Yes

Battery charge voltage: ............................6 V d.c.

Battery charge current: ............................550 mA

Charging unit supply voltage: ...230-240V~ 50 Hz

Charging time: ..........................................3 hours

Battery capacity .........................................1.5 Ah

Battery type: .......................................Lithium-ion

Weight: .......................................................0.4 kg

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

LpA sound pressure level ........................ 57 dB(A)

KpA uncertainty .............................................3 dB

LWA sound power level .......................... 68 dB(A)

KWA uncertainty .............................................3 dB

Wear ear-muﬀ s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Screwing without hammer action

Vibration emission value ah ≤ 2,5 m/s2

K uncertainty = 1.5 m/s2

Warning!

The speciﬁ ed vibration value was established in

accordance with a standardized testing method. It

may change according to how the electric equip-

ment is used and may exceed the speciﬁ ed value

in exceptional circumstances.

The speciﬁ ed vibration value can be used to

compare the equipment with other electric power

tools.

The speciﬁ ed vibration value can be used for initi-

al assessment of a harmful eﬀ ect.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect wor-

king order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever ne-

cessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

Residual risks

Even if you use this electric power tool in

accordance with instructions, certain resi-

dual risks cannot be rules out. The following

hazards may arise in connection with the

equipment’s construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

2. Damage to hearing if no suitable ear protec-

tion is used.

3. Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and

maintained.

5. Before starting the equipment

Be sure to read the following information before

you put the cordless screwdriver into operation:

1. Charge the battery only with the charging unit

supplied.

2. Only ever use screwdriver bits which are

suitable for the purpose and in faultless con-

dition.

3. Before you begin to screw in walls and ma-

sonry, check for concealed electric wiring,

gas pipes and water pipes.

6. Operation

6.1 Charging the battery (Fig. 2)

The battery is protected from exhaustive dischar-

ge. An integrated protective circuit automatically

switches oﬀ the equipment when the battery is

ﬂ at. In this case the bit chuck will cease to turn.

Warning! Do not press the On/Oﬀ switch any

more if the protective circuit has tripped. This may

damage the battery.

Check that your mains voltage is the same as that

marked on the rating plate of the battery charger.

Plug the battery charger in the plug socket and

connect the charging cable to the charging con-

nection. The charging process starts as soon as

Anl_RT_SD_3_6_1_Li_SPK1.indb 18Anl_RT_SD_3_6_1_Li_SPK1.indb 18 20.11.13 08:3420.11.13 08:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell RT-SD 3.6-2 Li Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Einhell RT-SD 3.6-2 Li

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info