Bedienungsanleitung Electrolux edb 8590 (Seite 25 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

323759

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

materials used. It is safe, not detri-

mental to the performance of the

steam iron, and will not reoccur.

Filling the steam iron with

water

Before filling the steam iron with

water ensure that the plug is

removed from the power outlet.

The steam iron can be filled with

water while it is hot.

0 Turn the steam selector (Fig. 1/E4)

to the Dry setting ( ).

0 Place the steam iron on its heel

and open the filling aperture cover

(Fig.1/D).

0 Using the beaker provided, slowly

pour water into the filling aperture

until the maximum water level (Fig.

1/B) is reached. Do not exceed the

maximum water level indicator.

0 Push the filling aperture cover

firmly to close.

It is safe to use tap water in your

steam iron. The anti-calc cartridge

removes minerals from the water,

preventing scale build-up. How-

ever, in extremely hard water areas

we recommend the use of distilled

or demineralised water.

Do not fill the steam iron with fab-

ric conditioner, starches or other

solutions as these will damage the

steam mechanism. Do not use

contaminated water.

Using your steam iron

0 Plug the power cable into a

220-240 V power outlet.

The LCD screen (Fig. 1/H) and the

orange temperature control light

(Fig. 1/E6, located between the

temperature +/- buttons) will illumi-

nate to indicate that the steam iron

is switched on and heating.

0 Use the temperature +/- buttons

(Fig. 1/E1) to select the desired

temperature setting, as displayed

on the LCD (see Fig. 3).

The bars on the LCD will flash as

the steam iron heats up to the sel-

ected temperature setting. As each

incremental temperature is rea-

ched, the bars will display solidly.

The actual temperature in degrees

Celsius will also be displayed on

the LCD, in increments of 5

degrees.

Once the steam iron has reached

the selected temperature, the

green temperature control light

(Fig. 1/E6) will illuminate to indicate

that the steam iron is ready to use.

0 Select the desired steam output on

the steam selector (Fig. 1/E4) or

turn the steam selector to the Dry

setting ( ) to iron without steam.

When steam ironing, ensure that

the tank is at least ¼ full of water.

When changing from a high tem-

perature to a lower temperature,

the red temperature control light

(Fig. 1/E6) will illuminate and the

LCD will flash indicating that the

steam iron is cooling down.

0 To reduce the cooling period, turn

the steam selector (Fig. 1/E4) to

any position on the steam band

and press the steam jet button

(Fig. 1/E5).

Once the steam iron has reached

the selected temperature, the

green temperature control light

(Fig. 1/E6) will illuminate and the

bars on the LCD will display solidly,

indicating that the steam iron is

ready to use.

The steam iron’s twin element con-

struction allows you to iron with

maximum steam, even on one dot

temperature setting

• (synth)

Using the spray mist

The spray mist can be used when

steam or dry ironing to pre-

dampen hard to iron fabrics.

822 949 431_EDB8590-EX.book Seite 25 Dienstag, 12. Mai 2009 10:47 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux edb 8590 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info