Bedienungsanleitung Electrolux edb 8590 (Seite 26 von 132) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

323759

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Ensure that the tank is at least ¼

full of water.

Press the spray button (Fig. 1/E2)

during ironing to release a fine mist

from the spray nozzle (Fig. 1/C).

Using the steam jet function

The steam jet function can be used

when dry or steam ironing.

Ensure that the tank is at least ¼

full of water.

0 Select the desired temperature

using the +/- buttons (Fig. 1/E1).

The steam iron’s twin element con-

struction allows you to iron with

maximum steam, even on one dot

temperature setting

• (synth)

0 Press the steam jet button (Fig.

1/E5) several times with the iron on

the soleplate to prime the pump.

If the water tank has run dry, it may

be necessary to re-prime the pump

after filling the steam iron with

water.

Steaming hanging items of

clothing

The vertical steam jet function is

ideal for steaming curtains, suits

and delicate fabrics.

0 Hang the article concerned on a

hanger and hold the steam iron at

a distance of 10–20 cm from the

material.

0 Now press the steam jet button

(Fig. 1/E5).

Do not attempt to freshen up clot-

hing whilst it is still being worn.

Risk of burning!

The 3 way safety auto-off

feature

For total safety and peace of mind,

the steam iron will automatically

switch itself off if left unattended. It

will switch off if left in the ironing

position for 30 seconds, or if it is

knocked onto its side for 30 sec-

onds (see Fig. 4/a). It will also

switch off if left unattended in the

upright position for 15 minutes

(see Fig. 4/b).

Should you leave the steam iron

unattended, the red temperature

control light (Fig. 1/E6) between

the +/- temperature buttons will

flash and a warning beep will

sound to alert you that the auto-off

function has been activated.

‘standby’ will appear on the LCD

screen (see Fig. 4/c).

Power to the steam iron’s heating

element will be cut and the steam

iron will start to cool.

0 To reset the safety auto-off feature,

simply move the steam iron.

The power to the steam iron’s ele-

ments will then reconnect and it

will begin heating again. Wait until

the green light illuminates before

recommencing ironing.

After 30 seconds the frequency of

the beep alarm will decrease.

Abnormal digital function

If you find that your steam iron is

incapable of steaming or that the

temperature control buttons have

become inoperable, a fault has

occurred.

In the event of a fault, the red tem-

perature control light (Fig. 1/E6)

located between the +/- tempera-

ture buttons will flash.

0 To reset the steam iron, simply

unplug the appliance from the

power outlet. After some seconds,

plug in again. The steam iron can

then be switched on again and

should operate normally.

If the fault persists contact the

Customer Care Department.

822 949 431_EDB8590-EX.book Seite 26 Dienstag, 12. Mai 2009 10:47 22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux edb 8590 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info