Bedienungsanleitung Electrolux esf 66710 x (Seite 86 von 96) (Deutsch, Englisch, Holländisch, Französisch)

126275

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

When using the "Multitab function", the cycle

durations may change. If this is the case, the

running time for the programme is automat-

ically updated on the digital display.

Activate/deactivate the ''Multitab func-

tion'' before the start of a washing pro-

gramme.

Once the programme is running, the

"Multitab function " can NO longer be

changed. If you want to cancel the "Mul-

titab function " you have to cancel the

programme setting and then deactivate

the ''Multitab function''. In this case you

have to set a washing programme (and

desired options) again.

Activation/deactivation of the Multitab

function

Simultaneously press and hold the two Mul-

titab buttons (function buttons D and E) until

the Multitab indicator light comes on. This

means that the function is active.

To deactivate the function press the same

buttons again until the indicator light corre-

sponding to the Multitab function symbol

goes off.

If the drying results are not satisfac-

tory we suggest that you:

1. Fill up the rinse aid dispenser with

rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position

• The activation/deactivation of the

rinse aid is only possible with the Mul-

titab function active.

Activation/deactivation of the rinse aid

dispenser

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C, until the lights of func-

tion buttons A , B, and C start flashing.

3. Press function button B, the lights of

function buttons A and C go off while the

light of function button B continues to

flash. The digital display indicates the cur-

rent setting.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

4. To change the setting, press button B

again, the digital display indicates the

new setting.

5. To memorize the operation, switch off the

dishwasher by pressing the On/Off but-

ton.

If you decide to revert back to the

use of individual detergents we ad-

vise that you:

1. Deactivate the Multitab function.

2. Fill up the salt container and the rinse

aid dispenser again.

3. Adjust the water hardness setting to

the highest setting and perform 1

normal washing programme without

loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the wa-

ter in your area.

5. Adjust the rinse aid dosage.

Select and start a washing programme

Select the washing programme and

delay start with the door slightly

opened. The start of the programme

or the countdown of the delay start

will occur only after the closure of

the door. Until then it is possible to

modify the settings

1. Check that the baskets have been loaded

correctly and that the spray arms are free

to rotate.

2. Check that the water tap is opened.

3. Press the On/Off button. The dishwasher

must be in setting mode.

4. Press the button corresponding to the re-

quired programme (see ''Washing pro-

grammes'' chart).

When a programme has been selected

the corresponding light comes on.

The programme in progress indicator

light comes on.

Close the dishwasher door, the pro-

gramme starts automatically.

The programme in progress indicator

light remains on.

86 electrolux

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux esf 66710 x Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info